5 Russia 
3 UK 
2 Canada 
2 Singapore 
1 Finland 
1 Germany 
1 Belgium 
1 Hong Kong 
1 Brazil 
1 China 
Guangzhou Zhilitong Electromechanical Co.,Ltd.
- Address: 1/F,No.2 Building,287 Longxi Road,Liwan District,G, Guangzhou, China
- Email:
- Phone: 862081600059
Business description
The ZLT Electrical Safety Testing Equipment is a selection of commontesting equipment for Flammability Testing, Protection Against Water,
Mechanical Durability, and Accessibility.
They are used to test consumer
appliances, enclosures, power cords, plugs, sockets, and other
electrical and electronic items.
All of these instruments conform to
standards such as IEC, EN, UL, VDE, CSA, GB, etc.
Many of our products come with CNAS (ISO17025) calibration certificates or they are available for an extra charge.
In addition, we have very competitive pricing on testing consumables that will work with different makes of test equipment.
Latest listings
-
Testingequipment Glow Wire TesterElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 24, 2013 - contact company for priceTo determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10, IEC60335, IEC60598 and other standards. The ignition source is imitated by an electrically heated wire loop against which the sample is pressed with a constant f...
-
Ball Pressure Test Device Zlt Qy1Electronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceTo determine the dimensional stability of parts consisting of non- ceramic, non-metallic insulating materials when exposed to higher temperatures up to maximum 250℃. According to IEC60695-10-2, IEC60335-1 clause 30.1, IEC60598-1 clause 13.2.1 F...
-
Cord Anchorage Torque Test Device Zlt Lj3Electronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceThis device is for testing the resistance to torque of cord anchorages at electrical appliances provided with non-detachable flexible cords with a diameter up to 10 mm and torques up to 0, 425N.m according to IEC60884-1 clause 23.2(table 18), VDE0620...
-
Socket Outlet Torque Balance Zlt Lj2Electronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceFor measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with I EC60065 clause 15.4.1 and figure 11, IEC60335-1 clause 22.3, IEC60884-1 clause 14.23.2. The balancing arm of the test apparatus p...
-
Equipment To Load The Samples With CurrentElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceInstalled into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage. Number of the current loaded conductors: 3 Input voltage: AC 220V 50Hz, other voltages and frequencies on req...
-
Tumbling Barrel Test MachineElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceThe ZLT Tumbling Barrel Tester simulates repeated falls which may occur to such devices as connectors or small remote control units which are normally attached to cables during use. ① Model:ZLT-GT1, is to determine the mechanical strength of la...
-
Test Sphere 934 50 Mm With HandleElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceThis probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code. Also used to verify protection from access with the back of the hand for an IP suffix A code. This probe is conform to IEC61032 test probe A and...
-
Jointed Iec Test Finger Zlt I02Electronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceThis is the “International” test finger required by most IEC61032 test probe B, EN and CSA Standards, in addition to many UL Standards. Built in strict accordance to the newest requirements with integral palm simulator. The handle and stop face are m...
-
Jointed Iec Test Finger Zlt I02aElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceConform to the IEC60335-1 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non-circular face. The ZLT Electrical Safety Testing Equipment is a sel...
-
Jointed Test Finger Probe For Blenders Zlt I02bElectronics Testing - Guangzhou Zhilitong Electromechanical Co.,Ltd. - China - June 21, 2013 - contact company for priceConform to the IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger a...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"