Flammability Classification Testing Iec 60695 11 10 - China

Flammability Classification testing- IEC 60695- 11- 10

Fire test center will provide IEC 60695- 11- 10( UL 94) Fire hazard testing to Plastics Material.

IEC 60695- 11- 10( UL 94) Fire Retardant Test to Plastics Material - Principle

IEC 60695- 11- 10 Fire hazard testing - Part 11- 10: Test flames - 50 W horizontal and vertical flame test methods

IEC 60695- 11- 10( UL 94) Fire Retardant Test to Plastics Material - Scope

IEC 60695- 11- 10: 2013 specifies small- scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source with a nominal thermal power of 50 W.

These test methods determine either the linear burning rate or the self- extinguishing properties of materials.

These test methods are applicable to solid and cellular materials that have an apparent density of more than 250 kg/ m3, determined in accordance with ISO 845 -

Two test methods are described.

Method A is a horizontal burning test and is intended to determine the linear burning rate of materials under specific test conditions.

Method B is a vertical burning test and is intended to determine whether materials self- extinguish under specific test conditions.

IEC 60695- 11- 10 Fire Retardant Test to Plastics Material- relative standards

UL 94 Test For Flammability of Plastic Materials for Parts in Devices and Appliances

ISO 4589- 2: 1996＋ A1: 2005 Plastics - - Determination of burning behaviour by oxygen index - - Part 2: ambient- temperature test

ISO 4589- 3: 1996 Plastics - - Determination of burning behaviour by oxygen index - - Part 3: Elevated- temperature test

UL1581: 2009 Reference standard fo electrical wires cables, and flexible cords VW- 1( clause 1080)

IEC 60332- 1- 2: 2004 Tests on electric and optical fibre cables under fire conditions –Part 1- 2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre- mixed flame

IEC 60332- 1- 3: 2004 Tests on electric and optical fibre cables under fire conditions –Part 1- 3:

Test for vertical flame propagation for a single insulated wire or cable – Procedure for determination of flaming droplets/ particles

IEC 60332- 2- 2: 2004 Tests on electric and optical fibre cables under fire conditions –Part 2- 2:

Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame

IEC 60332- 3- 21: 2000 Tests on electric and optical fibre cables under fire conditions Part 3- 21: Test for vertical flame spread of vertically- mounted bunched wires or cables – Category A F/ R

IEC 60332- 3- 22: 2009 Tests on electric and optical fibre cables under fire conditions Part 3- 22: Test for vertical flame spread of vertically- mounted bunched wires or cables – Category A

IEC 60332- 3- 23: 2009 Tests on electric and optical fibre cables under fire conditions Part 3- 23: Test for vertical flame spread of vertically- mounted bunched wires or cables – Category B

IEC 60332- 3- 24: 2009 Tests on electric and optical fibre cables under fire conditions Part 3- 24: Test for vertical flame spread of vertically- mounted bunched wires or cables – Category C

IEC 60332- 3- 25: 2009 Tests on electric and optical fibre cables under fire conditions Part 3- 25: Test for vertical flame spread of vertically- mounted bunched wires or cables – Category D

DIN EN 6059- 303 ( DRAFT) Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids

ISO 6722: 2006 specifies the dimensions, test methods, and requirements for single- core 60 V cables intended for use in road vehicle applications

IEC 60695- 2- 11- 2000 ( GB 5169.11) Fire hazard testing — Part 2- 11: Glowing/ hot- wire based test methods — Glow- wire flammability test method for end- products

IEC 60695- 2- 12- 2000 ( GB 5169.12) Fire hazard testing — Part 2- 12: Glowing/ hot- wire based test methods — Glow- wire flammability test method for materials

IEC 60695- 2- 13- 2000 ( GB 5169.13) Fire hazard testing — Part 2- 13: Glowing/ hot- wire based test methods — Glow- wire ignitability test method for meterials

ASTM D 2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle- Like Combustion of Plastics ( Oxygen Index)

For more detailed information about IEC 60695- 11- 10( UL 94) Fire hazard testing to Plastics Material.

Please contact firetest# firetc.

com or leave inquiry message online.

Company Contact:

• Posted By: Firetc Fire Test Center

• Phone: 8605925056213

• Address: Powercenter, No.301 Jiahe Road,, Xiamen , China

• Email:

• Website: http://www.firetc.net/

• Business Description: Firetc fire test center work with Ecosafene(www.
  
  ecosafene.
  
  c om) and Crepim(www.
  
  crepim.
  
  org) and will conduct kinds of fire test for Building material, railway components, marine equipment, aircraft material, motor vehicle and furniture, the test method involve: GB20286, GB8624, BS476 6, EN45545 2, NFF16 101, DIN5510 2, NFPA130, BS6853, NFP92 501, DIN4102, EN13501 1, FAR25.853, UL94, ASTME162, ASTME662, BS476 22, EN1363 1, AS1530
  
  FIRETC is a B2B electronic Business website for Fire Resource.
  
  And it is dedicated to providing a platform for miscellaneous communication and collaboration among the manufacturers, traders, and purchasing agents in industry of flame retarding, fire proof, fire resistance.
  
  FIRETC is an information center for worldwide fire regulation and standard and flame retardant knowledge, which aim for increasing the attention for fire and avoiding fire.
  
  FIRETC will provide more special platform and create more business chance to manufactures and traders who work for fire precaution, fire protection and fire safety