Changzhou Final Quality Check And Aql Inspection For Stainless Steel Cutlery - China

Randomly selected samples Samples were randomly taken from the line.

Inspector will check the quality, the size, the weight etc.

Stainless Steel Cutlery inspection (appearance) : 1 - The appearance should not have serious drawing marks, pitting and uneven polishing caused by light difference.

2 - In addition to the knife edge, the edges of various products should be free from scraping and stabbing.

3 - Smooth surface, no obvious silk screen printing, no depression.

The edges are not sharp and hairy.

4 - The welding part is firm, there is no crack, no coke, thorn phenomenon.

5 - The packing method conforms to the contract requirements.

Inspection and test methods

1 - Appearance inspection: The appearance inspection of the product should be inspected by hand and visual inspection under normal light, and the surface roughness of the stainless steel body should be inspected by GB/T10610 (surface roughness is inspected by comparative inspection).

2 - Corrosion resistance test.

3 - Fastness test.

4 - Long-term deformation test: put the specimen flat on a horizontal plane, the highest point of the neck of the handle faces up, apply 7N force per centimeter of length or 150N regardless of length, the loading time is 10S, and the permanent deformation allowed at the stress point of the specimen can be measured by a dial indicator.

5 - Neck fatigue strength test: Operate according to the following test steps, repeated 150 times, the result should meet the requirements.

A.

The product handle is fixed on the fixed fixture, the main body is fixed on the movable fixture, the movable fixture and the main body contact point is nearest to the fixed fixture, the clamp block spacing is 90mm±1mm(after clamping the specimen is in A horizontal position, there should be no additional stress of clamping); B.

The body of the product is centered on the neck, and the movement rate is 17 times /min, and the downward movement is 30mm±1mm, and then the uniform reset (the downward movement is 30mm for the first movement, and the uniform reset is the second movement).

6 - Security inspection.

Inspection Report The report shows the situation at the inspection site.

Check and verify that the goods meet the requirements of size, weight, packing and workmanship according to the information provided by customer.

Work is good, function test is normal.

After reading the report, customers can accurately judge whether the goods meet the requirements of the order.

Eagle Eyes China Inspection Company.

Eagle Eyes, Watch Your Quality All The Time!!!

Company Contact:

• Posted By: Eagle Eyes China Inspection Company

• Phone: 0086-180-5920-1520

• Address: https://www.china-qualityinspection.com/Report-Sample/, zhangzhou , fujian , China

• Email:

• Website: https://www.china-qualityinspection.com

• Business Description: Eagle Eyes (CHINA) Quality Inspection Co.,Ltd. is a professional Third Party China Inspection company, offering Quality Control, Factory Audit and Container Loading Supervision service.
  
  We have qualified quality inspectors & Auditors in different fields all over china.
  
  Our mission is to ensure your products purchased in China can meet your specifications, quality standards and safety requirements before they leave China boarder.
  
  Our cautious quality inspection at different stages of production can help find most of the product quality problems, thus you can always know the production status and request to correct the problems at factory even when you are far away from China.
  
  We can always finish one order inspection within one work day and present the detailed report to you within 24 hours after inspection.
  
  Please allow us a chance to work for you and show our expertise to you.
  
  QA & QC Inspection Service Ranges:
  
  Softlines: Textile, Apparel & Garments/ Fashion Accessories & Bags/ Children & Baby Clothes/ Underwear & Headwear/ Plush toys/ Fabric & yarn/ Shoes & footwear/ Leather, Rubber & Latex goods and many more
  
  Hardlines: Furniture & furnishings/ Homeware & Gardenware/ Building material/ Industrial & Construction/ Sports Equipment/ Gifts & Crafts/ Porcelain & ceramics/ Stationery & Office supplies and many more
  
  Electrical & Electronics: Consumer Electronics/ Home appliances/ Lights & bulbs/ Kitchen wares/ Computer & Tablet/ Testing equipment/ IT & Telecom/ Audio & Video and many more
  
  Mechanical Products: Auto Parts/ Casting & Forging/ Hydraulic Components/ Machinery & Engine Pump/ Metal Components and Assemblies/ Casting & plastic Moulds/ Scrap Metal/ Welding and many more
  
  QA & QC Inspection Service Networks: Coastal provinces and Major manufacturing cities across China.
  
  Suppliers Selection Services: Company Verification, Factory Audit, Sample Test, Factory Prototype Check
  
  Production Monitoring Services: Pre-Production Inspection, During Production Inspection, Pre-shipment Inspection,100% defects Sorting
  
  Secure Shipment Services: Container Loading Supervision, Container Unloading Supervision