Turn Waste To Energy Tyre Pyrolysis Plant Diesel Furnace Oil - China

Rubbish or Treasure?

Rubbish (such as wate tire, waste plastic, waste rubber, waste oil etc.

) are increasing every day.

How to dispose of these waste?

At the same time, oil resources are decreasing every day.

How to deal with the problem?

We use green technology (pyrolysis and distillation) recycling waste to oil resourses.

It is absolutely environmental friendly and creat great profits for you.

About us

We are specialized in manufacturing waste tire/plastic/rubber recycling machine, pyrolysis machine and oil ditillation machine.

We have three workshops producing every parts, professional laboratory improving technology and demo plant which could show customers running machine.

And experienced engineers guarantee installation of our equipments and after service.

Product Features

1 - No need to crush tires, we can feed whole tires into reactor.

Save manpower and improve productivity.

2 - Two water sealing devices, safety-valve, auto-alarm, vacuum device guarantee safety.

3 - Specialized catalyst improves oil yield and oil quality.

4 - Tail gases recycle to furnace.

Save energy and environmental friendly.

5 - All cooling waters are circulatory.

Great cooling effect.

Features of Dinter tire pyrolysis plant

1 - Safety: Dinter tire pyrolysis plant are equipped with many safety measures such as pressure gauge, safety

valve and alarming devices.

If there is extra pressure inside the reactor, alarming system will be ring, if no

workers hear this, do not worry, the safety valve will be opened automatically to decrease the inside pressure.

Besides oil-water separator and antiback fire device stop the waste gas back into reactor and we also avoid

the possibility that burning gas go back into reactor, then that can avoid the dangerous of explosion.

2 - Higher oil yield rate: Dinter tire pyrolysis plant adopted the most advanced independent cooling

system we concentrate on prelong the cooling time and increase cooling area so that cool more oil gas and get

more oil.

Besides we use catalyst when we pyrolysis tire, so that we can make fully pyrolysis for tires and

increase make full use of the tire materials and make good quality oil.

At same time with our 20 years

experience of making tireoil, our engineer can transfer our best operation skills which how can make more oil.

3 - Environmental friendly : Dinter tire pyrolysis plant have a whole set of carbon black discharging

system which can collect the carbon black under the sealing condition it is very clear.

After collecting carbon

black into bags, we can use carbon black fuel machine to turn the carbon black into fuel then u can make money from carbon black.

Another way is to increase the mesh.



Besides smoke from burning coal or wood can be filtered by our dust removing system, draught fan and cooling chimney will further remove the dust.

At last emission from chimney no color no smell and no pollution.

4 - Energy saving: Dinter tire pyrolysis plant is equipped with waste gas ( methane, ethane, propane,

hydrogen etc) recycling system, which can recycled the gas back into the furnace to heat reactor.

Fuel is

also a cost for customers, this system can save customers’ cost at same time we protect our environment.

5 - Fully Automatic: Dinter tire recycling plant is fully automatic.

Our plant is equipped with auto-feeder, which can put 10 ton tires into reactor with 2-3 hours instead of manpower loading with 6-7 hours.

From feeding to discharging all the process is automatic.

We called “Idiot Plant”, it means our plant is very

easy to operate, as it is very highly automatic.

If you wanna know more our plant regarding automatic, pls

send us inquiry, we will offer more details.

6 - Aftersales service: After purchasing our plant, we would send our engineer to instruct your workers to install your plant at same time training your workers how to operate plant correctly.

Each of engineer from Henan Dinter Heavy Industry Machinery co., ltd has many years experience of installation and

making tire oil.

Operating plant correctly decides tire oil yield rate directly and your workers’

safety.

7 - Laboratory: Our factory have several labs.

such as X-Ray Testing Room, Steel Plate Testing room.

Working process:

Firstly, put the raw material into the furnace and seal the feed inlet system.

Secondly, burn the fuel material(coal, wood, or natural gas , oil ) in the

combustion system .

the

reactor will slowly heat , when the temperature reach around 250 degree

celsius, it will produce oil

gas .

oil gas will be processed by our technology , then gone to cooling system to

become liquid oil.

the gas which cannot liquid under normal pressure , will be flow back to

combustion system to instead the fuel which heat the reactor, it can save

energy too much .

after finishing oil produce , the temperature of reactor will go down , in the same time , carbon black will be discharged automatically.

Lastly, when the temperature fall to 100 degree celsius, worker could open the door of reactor to discharge of steel wire, then can start another batch working.

Approx oil yield of different raw materials

PE 95%

PP 90%

PS 90%

ABS 40%

Leftovers of paper Wet 15-20%, dry 60%

House garbage 35-50%

Plastic cable 80%

Plastic bag 50%

Submarine cable 75%

Rubber cable 35%

Sole 30%

Big tires 45-50%

Small tires 35-40%

PVC Not suitable

PET Not suitable

Model

(diameter*length) (mm) 2200*6000

2200*6600

2600*6000

2600*6600

2800*6000

2800*6600

Boiler plate Q245R/Q345R

Thickness 12/14/16/18mm

Condensers Vertical condenser

Horizontal condenser

Product series 4th generation

5th generation

Slagging system Bucket elevator

Carbon black vacuum

Final product

(take tires for example) oil 45-50%

Carbon black 25-30%

Steel wire 10-15%

gas 5%

Total weight 30-35T

Total power 19kw

Space needed 150m2

Labor needed 4 workers

Company Contact:

• Posted By: Henan Dinter

• Phone: 8618790510806

• Address: Xinxiang city,Henan Province,China, Xinxiang , China

• Email:

• Website: http://www.dinter.com

• Business Description: Henan Dinter Heavy Industry Machinery Co., Ltd. is a professional modern
  
  enterprise which specialized in manufacturing waste tires/plastics/oil
  
  refin ing machines, We have been engaged in manufacturing pyrolysis
  
  machine for 18 years including 5 years overseas market experience.
  
  We
  
  have three manufacturing plants, tens of independent & professional
  
  departments to serve global customers.
  
  Our company constantly implements
  
  advanced management, sales and technology, and learn the domestic and
  
  foreign management mode.
  
  We combine advanced foreign technology with
  
  independent research, we move forward continuously to higher level
  
  product quality and after sales service.
  
  Our products have obtained certificates of ISO9001: 2000, ISO14001 and CE .
  
  Our business philosophies are "customer first, service excellent ".
  
  We regard customers demands as our center, and we can design products specially to satisfy their requirements.
  
  We lay stress on research and development technology, strictly manufacturing, timely transportation, and we will send our engineers to install machine and train customers workers, moreover we offer lifelong after sales service freely.
  
  Our products are quite popular in domestic and overseas market for the special design, good looking, safe using and good quality.
  
  Our products have exported to the USA, Mexico, Australia, India, Egypt, Vietnam, Pakistan, Saudi Arabia, Russia, Singapore, and Malaysia and so on more than 30 countries and cities.
  
  We can offer best quality and service to new and old customers by our team s unremitting pursuit and endeavor, thus exporting to many countries, make the waste rubbers and waste plastics to be treasure, make the world more beautiful.
  
  Our factory is located in xinxiang city , north of Henan province, China.
  
  Xinxiang city is not only the base of boilers and shell cover, but also the transfer center to the other cities and provinces, it takes just one hour from our factory to Zhengzhou International Airport.
  
  Our enterprise cultural concept is : "shared , happy, growing", we regard "no perfect individual, only perfect team "as our motto.
  
  We will go from strength to strength in the process of sharing and happy, we will try our best to offer satisfied service and grow up with customers all over the world.