Cn Garnet Rock Sandblasing Abrasives Waterjet Cutting Water Filtration Media - China

CNTM Garnet are composed of natural Almandine rock garnet grains and has

been famous for its natural hardness, more angular, sharper edges,

durability and abrasive characteristics, that meet all Occupational

Health and Safety requirements, as well as being environmentally inert.

Benefiting from its natural almandine rock garnet mine resource in North China, CN Garnet abrasives provide a perfect symbiosis of grain size, density and hardness/durability ensuring optimum abrasive efficiency in terms of lowest abrasive consumption and highest production rates at safe environmental and health conditions.

It is a cost effective alternative to silica sand, mineral slags, steel grits and shot due to low consumption (kg/m2) and high productivity (m2/hr) and the superior toughness and low friability enables it to be recycled 6 -10 times depending on the application

Mined by the leading producer of industrial garnet，Rizhao Garnet Ltd in North China, CN Garnet abrasives are processed to the highest quality standards in respect of mineral purity and meet the stringent requirements of ISO 11126-10: 2000E for chloride and free silica content.

It is free of metallic iron making it suitable for all areas of surface preparation including stainless steel, anti-magnetic steel and all specialty alloys.

Special fine grades of CN Garnet abrasives are also available for aluminium, turbine blades, fibreglass and other specialist surface preparation applications.

CN Garnet abrasives are used for abrasive blast cleaning in various industries.

It is approved by major oil companies, shipyards as well as large and small clients around the world including major paint manufacturers.

Surface Preparation Applications

CN Garnet are well suited to most fields of surface preparation industry, with or without subsequent coatings in particular:

★offreshore rig

★Building and structural steel

★Steel structure bridge

★Construction and maintenance of chemical plants, nuclear and fossil power stations, gas and sewerage plants, desalination and industrial plants.

★Construction and maintenance of containers and tanks, tank trucks and rail tanks, wagons and coaches

★Non-ferrous surfaces and turbine blades (special mesh).

★Oil and petrochemical maintenance in refineries and storage tanks including on-shore and off-shore installations

★Shipyards, new building, conversion and repair including antimagnetic and other special steels as well as aluminium super structures and aluminium and fibreglass hulls.

★Stainless Steel.

★Stone building facades and monuments

Advantages over Other Abrasives

Cost-effective Blast Cleaning; Low Dusting; High Productivity; Low Consumption; Superior Surface Quality; Improved Health and Safety and Environment; Recyclability; Surface Cleanliness.

Cost-effective Blast Cleaning

CN Garnet abrasives are a more cost-effective solution over other abrasives.

Contact Us to find out how we can help you achieve quality results at lower costs.

Low Dusting

Blast cleaning using CN Garnet abrasives provides significantly lower dust emissions due to its inherent material toughness and rapid settling as a result of high specific gravity.

This ensures minimum disruption and danger to adjoining operations and improved operator visibility and safety

High Productivity

Very fast cutting is achieved with speed, large number and shape of grains impacting on the surface.

The acceleration and speed of a grain in an air stream is a function of the inertia and hence the size of the grain.

Smaller grains accelerate much more readily and impart higher impact energy to surfaces resulting in a superior cleaning rate - usually twice the m2/hr of conventional abrasives.

Low Consumption

The unique grain size ensures that there are many more active grains impacting the surface and this greatly reduces abrasive consumption

Superior Surface Quality

CN Garnet grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removing all rust, soluble salts and other contaminations.

The blasted surface is free of embedment and rogue peaks and troughs.

SA3 White Metal is effortlessly achieved.

A surface profile of 50 - 75 microns is also easily achieved along with a much greater number of peaks per unit area.

Improved Health and Safety and Environment

CN Garnet abrasives are non-toxic with no silicosis hazard or risk of contamination from leachable heavy metals or radioactive substances.

Lower consumption and recyclability enables greatly reduced disposal volumes

Recyclability

CN Garnet abrasives are suitable for multiple usages and can be recycled 6 times or more without losing its superior cutting ability.

Surface Cleanliness

The ability of a paint system to adhere to the substrate and resist corrosion is determined by the cleanliness and profile of the substrate.

By using of CN Garnet abrasives as recommended provide the highest quality with the following benefits:

Even Profile:

The shape and size of CN Garnet grains provide an even profile of 50 - 75 microns (controlled by blast pressure and air flow) ensuring maximum surface area and number of peaks (reactive sites) for enhanced bonding.

The use of CN Garnet abrasives totally eliminate rogue peaks and troughs leading to a direct reduction in paint amount needed

Low Dust: CN Garnet abrasives lower dust emissions and dust incidences on the workpiece providing reduced cleaning after blasting and less contamination of the work area.

Improved Surface Cleanliness: There is almost no embedment on the substrate as the scouring action of the natural CN Garnet grains removes all salts, corrosion and contaminants from within deeply corroded and pitted areas.

It meets all international specifications for chlorides and silica (ISO 11126-10: 2000E).

Cn Garnet Rock Sandblasing Abrasives Waterjet Cutting Water Filtration Media

Please see our contact information below

Company Contact:

• Posted By: Rizhao Garnet Ltd.

• Phone: 866333711881

• Address: Bihai road 57#, RIZHAO , China

• Email:

• Website: http://www.chinagarnet.com

• Business Description: Rizhao Garnet Ltd. is a global leading company committed to mining,
  
  processing and distributing full grades industrial Almandine Rock
  
  garnet.
  
  Available CN Garnet abrasive and CN Jadeblast abrasive are in a
  
  variety of mesh size and ready to serve your sandblasting and waterjet
  
  cutting applications.
  
  We own three large scale garnet mines with a resource of over 100million tons of high quality rock garnet.
  
  The entire automated production process from mining to processing includes 4times crushing, 6 times washing, 3 times magnetic separation and 4 times screening, promising an annual output of 100, 000tons of garnet and ensuring the highest standard of quality in respect of mineral purity and meeting stringent requirements of ISO 11126 10: 200E for chloride and free silica content.
  
  The pure garnet grains is an ideal water filtration media and epoxy flooring aggregates as well.
  
  There are full ranges of different size abrasive for your options at moment.
  
  The sieve analysis of each item is exactly accordingly to the international standard.
  
  The entire production process from mining to processing and administration is certified under ISO 9001: 2008, ensuring the highest standard of quality in respect of mineral purity
  
  Since our establishment in 2009, we have achieved significant market share on Europe, Middle East, East and Southeast of Asia, Australia, USA, Canada and etc.
  
  Our strict quality control system and state of the art processing equipments guarantee consistent high quality standard of this superior product.
  
  CN Garnet abrasive and CN Jadeblast abrasive provide a perfect symbiosis of grain size density and hardness/durability.
  
  This ensures optimum abrasive efficiency in terms of lower abrasive consumption and highest production rates in safe environmental and health conditions.