U Shaped Tube Monel 400 B163 Uns N04400 - China

U-shaped Monel 400 Tube|B163 UNS N04400 Tube The structure of monel 400 (UNS N04400, NCu30) alloy is a high-strength single-phase solid solution, which is a nickel-based corrosion-resistant alloy used in the industry very early.

Monel 400 (with good comprehensive performance and wide application range, it has become an indispensable alloy due to its good corrosion resistance.

Monel 400 is mainly composed of Ni, 30% Cu, and a small amount of Fe (1% - 2%).

U-shaped Monel 400 tubes are commonly used in various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc.

in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, Gasoline, and water tanks, etc.

U-shaped Monel 400 Tube|B163 UNS N04400 Tube Chemical Composition

C 0.30max

Mn 2.00max

Si 0.50max

Ni 63.00min

Cu 28.00-34.00

Fe 2.50max U-shaped Monel 400 Tube|B163 UNS N04400 Tube corresponding grade

Monel 400 - - - Ni68Cu28Fe

JIS ASTM UNS, SAE DIN EN

NW4400 N0.4400 MONEL400 2.436 NiCu30Fe Physical properties of U-shaped Monel 400 Tube|B163 UNS N04400 Tube

Specific heat (J/kg.

K) 20℃ 427 Resistivity (μΩ.

cm) - 54.7

Thermal conductivity (W/m.

K) - 21.8

Average thermal expansion coefficient (10-6/℃) 20-100℃ 13.9

Melting point (℃) - 1300-1500 Mechanical properties of U-shaped Monel 400 Tube|B163 UNS N04400 Tube at room temperature

0.2%Yield Strength(N/mm²) ≤193

Tensile Strength (N/mm²) ≤483

Elongation (%) ≤35

Rockwell Hardness B75 max U-shaped Monel 400 Tube|B163 UNS N04400 Tube Usages U-shaped Monel 400 Tube|B163 UNS N04400 Tube can be used in many industrial fields: 1 - Seamless water pipes, and steam pipes in power plants 2 - Seawater exchangers and evaporators 3 - Sulfuric acid and hydrochloric acid environments 4 - Crude oil distillation 5 - Deep sea Pump shafts and propellers for water-use equipment 6 - Equipment used in the nuclear industry to manufacture uranium extraction and isotope separation 7 - Pumps and valves used in the manufacture of hydrochloric acid equipment 8 - Marine structure surface, seawater desalination/salt/right oil refining Equipment, marine components, heat exchangers, chemical/seawater desalination plant valves, pump components, etc.

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.