Silicon Steel Sheets - China

Silicon steel, also known as electrical steel, is a very low-carbon alloy (less than .

005%) that is used in motor and transformer laminations.

It is characterized by lower core loss properties and higher magnetic permeability than carbon steels.

There are a number of grades that include both grain-oriented and "NGO" (non-grain-oriented) versions.

The standard thicknesses are 0.007, 0.014, 0.0185, and 0.025 inches.

Silicon steels are often produced with an electrically insulating coating known as core plate, which eliminates the need to interleave laminations with the dielectric material.

CUT-TO-LENGTH LINES

- Material: silicon steel - Width: 20-1, 250 mm - Length: 40-6000 mm - Material thickness: 0.18-0.5 mm - Feeding precision: 0.1 mm - Speed: 240 m/min - Capacity: up to 180 sheets/min 18" wide multi-touchscreen SLITTING LINES

- Material: silicon steel

- Width: 20-1250 mm slit coils/0.18-0.5 mm - Width precision: 0.1 mm Silicon Steel:

1 - The thickness is 0.025 mm against CRGO silicon sheet steel thickness of 0.23-0.3 mm.

Lesser thickness in the sheet results in lower eddy current loss 2 - Random molecular structure of amorphous metal causes less friction than CRGO when a magnetic field is applied.

This allows easy magnetization and demagnetization and significantly lowers hysteresis losses, thus amorphous core significantly reduces core losses which is about 65-75%.

3 - Saves energy and therefore reduces greenhouse gases and other pollution 4 - Excellent option to reduce distribution losses and improve efficiency 5 - Superior electrical performance under harmonic conditions.

Possible to improve power quality and mitigate harmonics 6 - Lower temperature rise, slower deterioration of insulations and hence longer life 7 - Increase in the use of power electronics has resulted in a considerable amount of higher harmonics distortion in electrical power systems.

Higher frequency harmonics lead to an increase in transformer core losses whereas amorphous alloy provides lower loss under high frequency 8 - Easy for repair and replacement of coils Hot Tags: silicon steel sheets, China, suppliers, manufacturers, price

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.