Prime Quality Ppgl With High Ral 9002 From China - China

1、Brief Introduction for Prepainted Steel

( 1) Prepainted Steel Coil/ Sheet is coated with organic layer, which provides higher anti- corrosion property and a longer lifespan than that of galvanized steel coil/ sheet.

( 2) The base metals for Prepainted Steel Coil/ Sheet consist of cold rolled steel coil/ sheet, HDG steel coil/ sheet, electro- galvanized steel coil/ sheet and hot- dip alu- zinc coated steel coil/ sheet.

The finish coats of Prepainted Steel Coil/ Sheet can be classified into groups as follows: polyester, silicon modified polyesters, polyvinylidene fluoride, high- durability polyester, etc.

( 3) The production process of Prepainted Steel Coil/ Sheet has evolved from one- coating- and- one- baking to double- coating- and- double- baking, and even three- coating- and- three- baking.

( 4) The color of the Prepainted Steel Coil/ Sheet has a very wide selection, like orange, cream- colored, dark sky blue, sea blue, bright red, brick red, ivory white, porcelain blue, etc.

( 5) The Prepainted Steel Coil/ Sheet can also be classified into groups by their surface textures, namely regular prepainted coil/ sheet, embossed coil/ sheet and printed coil/ sheet.

( 6) The Prepainted Steel Coil/ Sheet are mainly provided for various commercial purposes covering architectural construction, electrical household appliances, transportation, etc.

2、Development History for Prepainted Steel

( 1) The production of Prepainted Steel Coil/ Sheet originated in the United States in the mid 1930s.

At the beginning, the technology was only adopted in producing prepainted steel strip.

Till 1995, the first batch of coating equipment for broad strip steel was invented and produced in the United States in 1955 - In the 1960s, the production of Prepainted Steel Coil/ Sheet made a rapid development in the United States, Europe and Japan.

Besides, the Prepainted Steel Coil/ Sheet were also developed greatly all over the world.

( 2) By the end of the 1980s, the production of Prepainted Steel Coil/ Sheet in China had been almost blank.

Until the 1980s, Wusteel and Baosteel established the double- coating- double- baking production lines of Prepainted Steel Coil/ Sheet in succession.

With increasingly promotion and application of Prepainted Steel Coil/ Sheet at home, more and more people make themselves acquainted with the production of Prepainted Steel Coil/ Sheet.

Thus, at the turning point of the 20th century the 21st century, a lot of production lines of Prepainted Steel Coil/ Sheet emerged like bamboo shoots after a spring rain and there was also a great demand for such products.

( 1) Type of Coating Structure

2/ 1: Coat the top surface of the steel sheet twice, coat the lower surface once, and bake the sheet twice.

2/ 1M: Coat and bake twice for both top surface and undersurface ( The thickness of bottom side coating is smaller than that of the product type 2/ 2) .

2/ 2: Coat the top/ lower surface twice and bake twice.

( 2) Usage of Different Coating Structure

2/ 1: The anti- corrosion property and scratch resistance of the single- layer backside coating is poor, however, its adhesive property is good.

The prepainted steel of this kind is mainly used for sandwich panel;

2/ 1M: Back coating has good corrosion resistance, scratch resistance and molding performance, besides it has good adhesion and is applicable for single layer panel and sandwich sheet.

2/ 2: The anti- corrosion property, scratch resistance and processing property of the backside coating of prepainted steel is better, so it is widely used for roll forming, but its adhesive property is poor, so it is not used for sandwich panel.

Company Contact:

• Posted By: Jiangyin Cheeho Imp & Exp Co. Ltd

• Phone: 8651256355866

• Address: No.1018 Qinfeng Road, Huashi Town, Jiangyin City, , Jiangyin , China

• Email:

• Business Description: Certified by BV and SGS
  
  Jiangyin Cheeho Imp & Exp Co.
  
  Ltd, who has been certified by BV and SGS, is a subsidiary of a group company who owns eight factories manufacturing aluminum profiles and steel products.
  
  A complete quality assurance system has been established in those factories from the purchase of original material to the transportation of the end products.
  
  With this system, all our products undergo an extensive testing and quality control procedure, ensuring they meet global quality standards.
  
  Wide Range of Products to Choose from
  
  Our product range includes tinplates, silicon steel, aluminum profiles, cold rolled steel, hot dip galvalume steel (HDGL), hot dip galvanized steel (HDGI), pre painted galvalume steel (PPGL) and pre painted galvanized steel (PPGI).
  
  We are also striving to provide our clients with free purchase service on the downstream products of our current supply.
  
  Holding ISO 9001: 2008 Certification
  
  As an ISO 9001: 2008 certified maker, we are committed to offering our clients considerate and professional customer service from the first step of your inquiry to the after service of your order.
  
  All our customer service staff are well trained and educated, having good command of both product knowledge and language ability.
  
  It will turn out to be a convenient and time saving experience dealing with us.
  
  Inquire today to begin sourcing.