Blind Threaded Forged Flange - China

The flange is a joint between the pipe and the pipe for the connection between the pipe ends; it is also used for the flange on the inlet and outlet of the equipment for the connection between the two devices, such as the flange of the reducer.

A flange connection or a flange joint refers to a detachable connection in which a flange, a gasket, and a bolt are connected as a combined sealing structure.

Pipe flange refers to the flange used for piping in the pipeline installation.

It is used on the equipment to refer to the inlet and outlet flanges of the equipment.

There are holes in the flange, and the bolts make the two flanges tightly connected.

The flanges are sealed with gaskets.

Flange threaded connection (threaded connection) flange, welded flange, and clip flange.

Flanges are used in pairs.

Low-pressure pipes can be used with wire-bonded flanges, and welded flanges are used for pressures above four kilograms.

A gasket is placed between the two flanges and then bolted.

Different flange thicknesses for different pressures use different bolts.

Pumps and valves, when connected to the pipeline, the parts of this equipment are also made into the corresponding flange shape, also known as a flange connection.

Connection parts that are bolted at the same time around two planes are generally referred to as "flanges", such as the connection of ventilation ducts.

Such parts may be referred to as "flange parts".

However, this connection is only a part of the equipment, such as the connection between the flange and the water pump, it is not good to call the pump "flange parts".

Smaller such as valves, etc., can be called "flange parts".

Reducer flange for the connection of the motor to the gear unit and the connection between the gear unit and other equipment.

Main Flanged type as below Weld Neck Forged Flange; Threaded Forged Flange; Lap Joint Forged Flange; Socket Weld Forged Flange; Blind Forged Flange; Slip On Forged Flange

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.