Stainless Steel Flat Bar - China

Our stainless flat bar products are divided into two primary groups – true flat bar and sheared and edged.

A true flat bar is usually in the HRAP condition though it may sometimes be cold drawn.

This bar has fairly sharp corners and tighter tolerances on thickness and width than sheared and edged and is often used by fabricators where the finished project is polished.

Sheared and edged material is cut from the plate, and then put through a process that straightens the bars and cleans up the edges.

This is a much more cost-effective way to buy a flat bar when corner sharpness and tolerances aren't critical.

The standard lengths of the true bars are 12'-14' random lengths, while sheared and edged bars typically come in 12' dead lengths.

Available Steel Grades: 304/304L, 316/316L, 303, 410, 416, 17-4, and more!

- True flat bar and sheared and edged options are available.

- Cold-drawn flat bars are available in varying grades and sizes.

- DFARS or domestic material is available in a wide range of sizes.

- We will custom saw cut to length.

- Polishing services are available.

Stainless Steel Flat Bar

- Standard: ASTM A276

- Condition: HRAP or SRE

- Size Range: Width 12 to 150 mm

- Thickness: 33 to 25 mm (depending on size)

- Grades: 304, 316 Processing Bar Cutting

The download below provides detail of the size range and thickness within the grades.

The information provided is for standard stock products and does not encapsulate all available combinations.

Please contact the nearest Atlas Steels sales outlet if the non-standard product is required and we will enquire about its availability through our global supply network of mills and stockists.

Our stainless steel flat bar is made up of quality raw material.

Procured by advanced equipment, our drawn flats are used in various industries.

Because of its nice surface, it is always used in some industries like architecture.

Specification

- Standard: ASTM A276, AISI, GB/T 1220, JIS G4303, - Grade: 200 series & 300 series & 400 series

- Thickness: 2mm-100mm

- Length: as per customer's requirements

- Length: usually 4-6 meters, or as per customer's requirements

- Surface: black & pickled & bright & hairline.

Hot Tags: stainless steel flat bar, China, suppliers, manufacturers, price

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.