Stainless Finned Tube - China

Laser Welded Stainless Steel Fin Tube:

The laser welded fin tube uses laser welding technology, is 99%-100% fully welded, has Higher heat transfer ability compared to HF welding and Wrapped fin tube, Lower energy consumption, reduced cost of consumables, and increased efficiency of the process.

widely used in corrosive conditions, such as heat recovery in condensing boilers, and heat exchangers in Industries of Chemical, Petroleum, Petrochemical, Metallurgical, Power, Food, and Maritime.

The products are finned tubes using laser welding.

Because the products have good thermal efficiency and good non-corrosibility, it's always applied to petroleum & metallurgy & chemical & Industrial waste heat recovery & Civil gas water heater, radiator & electric water heater, and others.

Although the unit price of laser welding is higher than high-frequency welding or winding without welding, Laser welding finned tube has a better welding penetration rate and better heat transfer efficiency, considering long-term use it is a maximum energy saving to reduce the cost of use, so laser welding tube is the most economical.

- Tube material: stainless steel, titanium, copper

- Pipe diameter: 10mm - 150mm

- Pipe wall thickness: 1.0mm - 5.0mm

- Fin thickness: 0.4mm - 1.0mm

- Fin pitch: 2.0mm - 20mm

- Fin height: 0.4mm - 15mm

- Fin material: stainless steel, copper Main Features

- Advanced technology: the product uses laser welding technology with a 100% penetration rate.

- Stable quality: the equipment uses a fully automatic production process, and product quality is stable and reliable.

- High heat efficiency: the product has smaller fin spacing and thin tubes to increase the heat transfer area and heat transfer rate.

- This product can be bent into different shapes to meet different production needs.

Fully Laser Welded Finned Tubes is a Welding rate of 100%.

for WasteHeat Recovery in Condensing Boilers.

Detail:

- Type of Base tubes: Seamless stainless steel tube

- Material: stainless steel

- Base pipe outer diameter: 12-50mm

- Base pipe length: <10m

- Fins Spacing: 2-10mm

- Fins Height: 6-18mm

- Fin thickness: 0.4-1.0mm

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.