Aluminum Extruded Profile - China

Aluminum profile/Extrusion Price is one of the basic products.

We are capable of designing and extruding aluminum extrusion profiles with a diameter of up to 200 mm.

The most commonly used alloys are 6061, 6063, etc.

We accept different surface treatments like Anodizing, Powder Coating, Polish, Brush, etc.

Both standard and customized aluminum extrusions are available.

Different alloys have different properties, and the selection of an alloy is important for an aluminum extrusion profile.

1000 series for Aluminium Profile: This non-heat treatable aluminum alloy series is available in extruded sections with a minimum purity of 99.0% aluminum for 1100 alloy and as high as 99.6% minimum aluminum for 1060 alloy.

They offer the best corrosion resistance of any alloy group and display excellent forming, welding, brazing, and finishing characteristics.

These alloys can be extruded as profiles, rods, bars, and tubing.

Typical alloys are as follows: 1050, 1060, 1350, 1100 6005 alloy for Aluminium Profile: A medium-strength alloy that is similar to alloy 6061 except it contains a higher amount of silicon.

It is used in designs that require moderate strength but are generally not recommended for applications where the structure may be susceptible to impact or overloading.

6061 alloy for Aluminium Profile: It is one of the most widely used alloys in the 6000 series, popular for medium to high strength requirements, and has good toughness characteristics.

It is suggested for standard and custom, solid and hollow shapes, rod and bar products, and seamless and structural pipe and tube.

It has good corrosion resistance and offers good finishing characteristics and responds well to anodizing.

However, where cosmetic appearance is critical, consider the use of alloy 6063 - 6063 alloy for Aluminium Profile: One of the most popular alloys in the 6000 series, provides good extrudability and a high-quality surface finish.

Used in standard architectural shapes, custom solid shapes, and heatsinks, as well as seamless and structural tube and pipe.

It provides good resistance to general corrosion and offers an excellent response for anodizing in its T5 temper.

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.