Aluminum Sheet 1050 - China

Aluminum sheet is a new type of building decorative material that is becoming increasingly popular with customers.

Aluminum wall paneling is lighter than iron and steel.

We would like to highlight our aluminum sheet and aluminum alloy sheet (1050, 1060, 1070, 1100, 3003, 3004, 3105, 8011, 5052) with good physical performance, a flat surface, and a smooth edge, suitable for both deep drawing and spinning.

Because the 1100H24 aluminum alloy sheet contains a high percentage of aluminum and has good expandability, it can be shaped into a flat surface, a curve, a circle, or any other pattern.

The four most common aluminum grades available as sheet metal are the 1XXX, 3XXX, and 5XXX series.

1XXX series aluminum alloy sheet is the commercially pure aluminum, so it is highly chemical and weather resistant.

It is ductile enough for deep drawing and weldable but has low strength.

It is commonly used in chemical processing equipment, light reflectors, and jewelry.

3XXX series aluminum alloy sheet is stronger than 1100 while maintaining the same formability and low cost.

It is corrosion-resistant and weldable.

It is often used in stampings, spun and drawn parts, mailboxes, cabinets, tanks, reflectors, and fan blades.

5XXX-series aluminum alloy sheet is much stronger than 3003 while still maintaining good formability.

It maintains high corrosion resistance and weldability; common applications include electronic chassis, tanks, and pressure vessels.

The mechanical properties of aluminum alloy sheets and strips Aluminum Sheet/Plate has an excellent strength-to-weight ratio and a high resistance to corrosion.

These unique characteristics, along with its electrical and thermal conductivity, make it the best choice for many industrial applications.

A wide selection of both common and heat-treated alloys is available from stock to service the following industries.

- Aerospace: 2024, 2124, 6061, 7050, 7075, 7475

- Air Separation: 5083, 6061

- LNG Heat Exchangers: 5083

- Marine/Shipbuilding: 5086, 5083, 6061

- Construction: 3003, 6061, Aluminum Treadplate

- Tool & Die: 7075, Aluminum Cast Tooling Plate

- General Machining: 6061, 7075

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.