Pa Plastic Medical Injection Molding For Micro Eyelash Brush - China

PA Plastic Medical Injection Molding For Micro Eyelash Brush

Quick Detail:

1 - The part name: Micro eyelash brush( plastic injection mold)

2 - Plastic material: PA

3 - Cavity material: H13 HRC48- 52

4 - Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5 - Gate type: Edge- gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

6 - Mold base standard: LKM Local standard, DME or HASCO, Customize according to customers' requirements.

7 - Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD- MASTER, MERKLE, Parker, HPS, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

Description:

The part name: Micro eyelash brush

Mold type: Plastic Injection Mould with cold runner system

Part Material: PA

Locating ring Dimension: Ф 100

KO Pattern: 200* 200

Sprue Radius: SR 19

Ejection type: ejection pins.

Mold construction description: cold runner system with edge gate, 2 plates, 2sliders, and many micros inserts and shut off area.

Many size tolerances are no more than +/ - 0.02mm.

the brush bristles each line must have a insert for cut cavity steel and be helpful to mold venting, the diameter of the brush bristles is 0.3mm, which is very difficult to cut steel.

This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport, Sliver Marks, Gas Trap Effect, Visible Ejector Marks, Deformation, Short shot Filling, Burnt Streaks, Sink Marks, Flash, Over dimension, Under dimension, Stress Crack etc.

Moreover, the product finishing surface must meet the requires more than SPI- SPE A- 2.

Company Contact:

• Posted By: Shiny Industrial Technology Limited

• Phone: 86076985355698

• Address: Shangsha,Changan Town,Dongguan City,Guangdong Prov, Dongguan , China

• Email:

• Business Description: Shiny mold specialize in Mold Making & Injection molding that has been
  
  defined since 2003 , well equipped with precision CNC, Mirror EDM,
  
  Slow wire cutting, Injection Machine and the most advanced CMM etc.
  
  Shiny is able to take an idea from its conception to a completely
  
  finished product.
  
  All of our mold standard meets DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive etc.
  
  Our supplier include DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD MASTER, MERKLE, parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc.
  
  Complete in house Mold making, Mold testing and Injection Molding.
  
  Shiny supply finished parts from 50 pieces upwards to millions of parts as per the customer s request.
  
  With a group of senior technicians, we are constantly devoted to improving quality and updating technology.
  
  Shiny mold adopts a TQM system focused on customer service in its manufacture, actively advocates the standardization of ISO9001 and constantly improves technical process so as to strictly supervise and control the whole process of designing and manufacturing, which has further ensured the quality of the products.
  
  Sticking to "Customer First, Science & Technology First" , the company has served its customers with the principle of constant innovation and improvement ever since its establishment.
  
  It has developed a system of continuously learning from advanced foreign technology and technical process for mold production and has made utmost efforts in improving the quality, reducing the delivery time and offering best after sale service.
  
  Believe that Shiny (HK) industrial Technology Limited.
  
  is your most satisfactory choice！