Wireless Charging Scheme For Intelligent Shoes - China

The built-in battery capacity is 450mAh, and the charging method adopted is quite novel and convenient-wireless charging, and when charging, the shoe can be directly placed on the wireless charging emission board, which is convenient and convenient, waterproof and dustproof, and the user experience is very good.

1 > power on: hold the front and inner sides of the left and right shoes together for 6 seconds; Or a single shoe tip is kept downward for six seconds, and then the machine can be started; 2 > shut down: hold the front and inner sides of the left and right shoes together for 6 seconds; Or a single shoe tip is kept downward for six seconds, and then the machine can be turned off;

3 > mode: supports ten color changing modes; The color of a single shoe can be changed by shaking or jumping with dance steps or lightly touching the front and inner sides of two shoes.

4 > charging: the rear ends of the left and right shoes are correspondingly placed in the charging area of the charging box to wirelessly charge the luminous shoes, and the three charging lamps of the charging panel are correspondingly lit; At the same time, the red light in the shoe lights up one by one.

The full charge time is about 3 hours at most, and the light bar and green light are all on at the same time.

Note: After the battery is left unused for a long time (the battery voltage is lower than 3V), normal charging may not be seen for 10 minutes before charging.

5 > power supply: lithium battery inside luminous shoes: 3.7V/450mAh；; Charging adapter output voltage 5V/1A; Wireless charging current: 100-500 mA; Wireless charging frequency: 100-370KHz；; Charging distance: 5-20mm; Charging time: 2-5h.

YMP Industry Limited produces a large number of wireless charging modules, wireless chargers, wireless receivers, which can be customized according to customer requirements, welcome to consult and negotiate! Details：https: //ymp-hk.

com/Product/custom-design-PCBA/

Company Contact:

• Posted By: Yixin Precision Metal and Plastic Ltd

• Phone: 0755-2756 6993

• Address: 沙井街道壆岗松山� ��业区松山西路16-3� ��, shenzheng , guangdong , China

• Email:

• Website: https://www.ympcnc.com/

• Business Description: Shenzhen Yixin Precision Metal and Plastic Ltd. is a one-stop service factory specializing in aluminum machining, anodizing and assembling.
  
  The company was established in 2009 and has long been devoted to the production of aluminum products for any industry.
  
  The specialist provides 24h service for customer; the engineers spent a lot of time studying the impact of different aluminum elements and different oxidation of the pigment on the anode, in the appearance of high demand aluminum machining has its own unique advantages;