Pneumatic Rubber Roller Ship Laucnhing Airbag - China

Pneumatic rubber roller ship laucnhing airbag

Marine airbag for ship launching have the best designed structure which consists of five different functional membranes in rubber layers.

1) Outer Rubber Layer

The outer rubber layer that covers the outside of marine airbag to protect under layers from abrasion and other external forces.

This compound has sufficient tensile and tearing strength to withstand any condition and hard usage.

2) Inner Rubber Layer The inner rubber layer seals pressurized air inside marine airbags.

3) Synthetic-Tire-Cord Layer as Reinforcement

The reinforcement cord layers, which are made of synthetic-tire-cord commonly used in tires, are arranged at ideal angles to hold the internal pressure and distribute stress evenly.

So they can provide strong efficient reinforcement.

How to choose marine airbag size?

We could manufacture diameter from 0.8m up to 2.0m, length from 5.0m up to 24.0m, and layers from 3 to 10layers.

If you are not sure about the airbag size needed, could tell me where do you use them, for ship launching, landing, marine salvage or caisson lifting? And the information( length, width, weight) of your target ship.

We will recommend you a most suitable airbag size.

--Delivery: Marine airbags are very small in size when deflated, and are lightweight.

Thus, they can be easily transported and deployed.

Airbags could be transported in a 20' or 40' GP deflated without air.

Advantages of marine airbag for ship launching

1 High strength

2 Wear resistance and anti-aging

3 Good air tightness

4 Safety and reliability

5 High kneading & compressing resistance and damping capacity

6 Design different sizes according to client's request

7 Good raw material-cord fabric makes us win warm praise from clients

8 Produce according to ISO14409 Advantages of ship launching solution

1 - Less land form limited

Only need enough bearing power ground and no sharp objects 2 - Minimum fixture needed

Need no more than air compressors, winches and steel ropes

3 - Environment Protective

Do no harm to the environment.

No chemical needed.

4 - Time & money saving

Marine airbags are much cheaper and portabler than other methods.

Procedure of launch a ship by marine airbags

1 - Pre-launch preparation work for shipyard

Slipway Enhancement

Water survey

Vessel skeg enhancement

Ground anchor

Seal thruster holes if there are.

2 - Basic equipments needed for ship launching

Rigging equipments: Winch, Pulley, Swivel, Lug, Shackle, Wire sling, Ground Anchor

Inflate equipments: Air Compressor, Inflating Pipe

Airbag moving equipments: Forklift, mobile crane

3 - Crew preparation

4 - Rigging Arrangements

5 - Lifting the blocks

6 - Move vessel forward

7 - Vessel Launching

Company Contact:

• Posted By: Qingdao Florescence Rubber Products Co.,Ltd

• Phone: +86 18205321973

• Address: Moscow Road, Qingdao , Shandong Province, China

• Email:

• Website: https://www.fendercore.com

• Business Description: Engaged in manufacturing marine airbag, pneumatic fender, foam fender and other rubber fenders since 1992.