Hydraulic Solenoid Proportional Valve Benchmarking Hydraforce Sp08 21 - China

For Solenoid Proportional Valve equivalent to HydraForce SP08-21, AAK has received 5 inquiries within 3 months This Monday, we launched a solenoid proportional valve equivalent to HydraForce standard part SP08-21 - The features of this solenoid proportional valve:  Continuous-duty rated coil.

 Efficient wet-armature construction.

 Optional waterproof E-Coils rated up to IP69K.

 Industry common cavity.

 Compact Size.

The function of this solenoid proportional valve:

A solenoid-operated, 2 port, normally open, poppet type proportional, screw in hydraulic cartridge valve designed for low leakage in load-holding applications.

When de-engergized, the SP08-21 allows flow from 2 to 1 - Flow from 1 to 2 is severely restricted.

When the valve is partially energized (see performance curve) the valve begins to throttle flow from 2 to 1 - When fully energized, the valves poppet closes on the seat, blocking flow from 2 to 1 - The cartridge will allow 1 to 2 flow after overcoming the solenoid force.

AAK has received 5 inquiries for this solenoid proportional valve within only 3 months, from May to July 2023, with 3 customers placed trial orders.

This hydraulic solenoid proportional valve is not only widely used, but also has multiple functions, especially its good performance.

Although some China hydraulic cartridge valve manufacturers can produce this hydraulic solenoid proportional valve, and its functions may also be compared to HydraForce standard part SP08-21, their solenoid proportional valve performance may be a problem.

AAK hydraulic cartridge solenoid proportional valve 2 advantages:

1 - Internal leakage: 5 drops/min, benchmarking against HydraForce

2 - Its service life is 2 times that of its peers Technical parameters of AAK E-SP08-21 Hydraulic Solenoid Proportional Cartridge Valve:

Max.

Operating Pressure: 207 bar (3000 psi)

Flow: See PRESSURE DROP VS.

FLOW graph

Internal Leakage: 5 drops/min max.

at 207 bar (3000 psi)

Operating Fluid Temperature: - 40 to 100 °C (with Standard Buna N seals)

Cavity: 08-2 The newly launched AAK E-SP08-21 solenoid valve, benchmarking HydraForce, within 3 months, received 5 inquiries, and 3 customer trial orders.

You can also try it out.

AAK HYDRAULIC VALVES (649) 2023-08-14

Company Contact:

• Posted By: AAK INDUSTRY CO.,LTD.

• Phone: 86-574-83008115

• Address: Bona Building, No. 456 Taikang Middle Road, Yinzhou, Ningbo, China, NINGBO , ZHEJIANG , China

• Email:

• Website: https://www.aakindustry.com/

• Business Description: Hydraulic valve manufacturer, focused on the Development and Manufacturing of Hydraulic Cartridge Valves since 2006, in Ningbo China
  
  Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.
  
  Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.
  
  68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.
  
  Our Products:
  
  - Hydraulic Relief Valves Dust Free Packaged For Food Equipment
  
  - Hydraulic Needle Valves 450bar Over 1 Year Service Life
  
  - Hydraulic Pilot Operated Relief Valves Benchmarked With German Hawe
  
  - With Temperature And Gain From Aak Hydraulic Valves
  
  - Hydraulic Valve Blocks Free Of Oil Leakage