Hydraulic Manifolds Can Be Used In Aviation - China

Hydraulic manifolds of 450MPa pressure resistance and ultra light weight, AAK samples can be used in aviation at one time Isacco compared more than 10 hydraulic manifold factories.

No manufacturer can achieve the light hydraulic manifold with pressure resistance of 450MPa, and AAK successfully completed the sample at one time.

At the beginning of last year, Isacco’s company developed an aviation hydraulic power unit, which is the first time for SICMI company to try aviation equipment.

Their customer specially mentioned that the hydraulic manifold should withstand a high pressure of more than 450MPa, especially pay attention to the weight of the hydraulic valve block, because the aviation equipment has strict restrictions on the weight of each part, and this hydraulic valve block must be made of ultra light aluminum.

Isacco got the purchase list of hydraulic manifolds.

First, he contacted the current hydraulic manifold manufacturers.

Only 3 manufacturers agreed to try samples, and other manufacturers gave up.

1 month later, Isacco successively received the hydraulic manifold samples.

After installation and commissioning, the high pressure resistance test of the hydraulic manifolds from 2 factories failed.

Although the pressure resistance test of the hydraulic manifold of the 3rd factory was successful, its weight was more than 20% higher.

Isacco asked the 3rd hydraulic manifold manufacturer to re-sample, but the manufacturer advised that 7075 aviation aluminum is the lightest material.

Isacco had to look for new hydraulic manifold manufacturers again.

He contacted more than 10 hydraulic manifold manufacturers successively, but there was basically no feedback.

Isacco left a message on AAK website: Does AAK have lighter materials than 7075 aviation aluminum to produce hydraulic valve blocks? With this message, we understand that this hydraulic manifold should be used in aviation, not only light, but also resistant to high pressure above 450MPa.

According to the hydraulic manifold drawings and working condition requirements provided by Isacco, frankly speaking, our engineers have no ideas, because 7075 aviation aluminum is the preferred material for our production of high-pressure hydraulic valve blocks.

AAK hydraulic valve just likes the development instructions given by customers, which are not involved in AAK before.

We are willing to cooperate with Isacco to crack a hard nut of this hydraulic manifold.

AAK spent more than 2 months comparing aluminum materials for 12 times and selecting a material lighter than 7075 aviation aluminum after trying samples for 3 times.

Isacco received AAK hydraulic manifolds and conducted pressure test.

One week later, Isacco asked about the production time of 600 hydraulic manifolds and told us that AAK was the only hydraulic manifold manufacturer that passed the test, with a pressure of 450Mpa and a weight that met the requirements.

Why only AAK can achieve hydraulic manifolds with high pressure resistance and light weight?

1 - AAK hydraulic valve has an engineer who has worked in the Shanghai factory of Germany HAWE for 11 years and has unique experience in high pressure resistance.

2 - AAK has material engineers who is specially responsible for screening, comparison, testing and docking with the Research Institute.

3 - This material is independently developed in China, a patented high-strength multi-element microalloyed cast aluminum alloy.

It has light texture, strength up to 480-540Mpa and hardness ≥ HB140 - It is the preferred material for the core components of aviation equipment.

Last week, Isacco privately informed that the customer has a very good sales and would place a big order again.

His boss was very satisfied with his last procurement performance.

After working for 3 years, he was finally promoted to procurement manager.

AAK hydraulic manifolds, can be used in aviation, you can also have a small try! AAK HYDRAULIC VALVES (221) 2022-05-09

Company Contact:

• Posted By: AAK INDUSTRY CO.,LTD.

• Phone: 86-574-83008115

• Address: Bona Building, No. 456 Taikang Middle Road, Yinzhou, Ningbo, China, NINGBO , ZHEJIANG , China

• Email:

• Website: https://www.aakindustry.com/

• Business Description: Hydraulic valve manufacturer, focused on the Development and Manufacturing of Hydraulic Cartridge Valves since 2006, in Ningbo China
  
  Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.
  
  Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.
  
  68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.
  
  Our Products:
  
  - Hydraulic Relief Valves Dust Free Packaged For Food Equipment
  
  - Hydraulic Needle Valves 450bar Over 1 Year Service Life
  
  - Hydraulic Pilot Operated Relief Valves Benchmarked With German Hawe
  
  - With Temperature And Gain From Aak Hydraulic Valves
  
  - Hydraulic Valve Blocks Free Of Oil Leakage