Cartridge Valve Spool Processing Skills - China

3 Skills to get the personalized valve spool done, AAK Hydraulic Cartridge Pressure Control Valve solved Nabulung's troubles The local manufacturer who has cooperated for 5 years can't meet the precision requirements of the hydraulic cartridge pressure control valve spool, and the defective rate is up to 70%.

They gave up 2 weeks after receiving the order.

After AAK took over, 3 targeted processing skills were used.

The roundness of the hydraulic cartridge pressure control valve spool accuracy could be less than 0.0005, the finish less than Ra0.02, and the percent of pass was more than 95%.

Nabulung was completely relaxed after receiving AAK samples of hydraulic cartridge pressure control valves.

Nabulung is from Egypt.

In the first half of this year, their engineer asked him to purchase 8 hydraulic cartridge pressure control valve samples for the development of new equipment.

The roundness of the hydraulic cartridge pressure control valve spool shall be less than 0.0005 and the finish shall be less than Ra0.02 - Nabulung realized that the spool was very difficult.

He chose a local hydraulic cartridge valve manufacturer who had cooperated with him for 5 years to make samples.

The manufacturer started to try samples.

2 weeks later, the manufacturer gave up.

The defective rate of the spool was as high as 70%, and the accuracy was not stable.

Nabulung found AAK and sent us an email: I noticed the advantages and characteristic processing technology of AAK in the production of valve spools.

Can AAK sample the roundness of valve spool less than 0.0005 and the finish less than Ra0.02? After communication, we learned the high defective rate of the original manufacturer of the hydraulic cartridge pressure control valve.

According to the drawings provided by Nabulung, the requirements for this spool are indeed very individual, and the conventional production process does not work, but AAK has some experience in spool production and can adjust the process accordingly.

After 36 days, AAK sent 8 samples of hydraulic cartridge pressure control valves.

37 days later, Nabulung emailed us that their engineer was very satisfied with AAK hydraulic cartridge pressure control valve samples, especially the stable accuracy of the valve spool.

He was worried for nearly 2 months, and finally he could put it down.

The roundness of AAK hydraulic cartridge pressure control valve spool accuracy can be less than 0.0005, and the smoothness is less than Ra0.02, which mainly comes from 3 unique processing methods: 1 - Roughly turn the profile of the valve spool, leaving a margin of 0.15mm, slotting, drilling, and straightening with deflection instrument to make the bending less than 0.02N/m.

2 - The valve spool shall be subject to heat treatment and rough grinding after the hardness reaches HRC65 - The center hole is used for high-precision cone hole positioning, and then the ejector pin holes at both ends of the valve spool are honed to make the roundness of the ejector pin hole less than 0.0005, the finish is less than Ra0.02 - 3 - Cryogenic treatment, freezing treatment at - 65°C - 75°C for 2 - 2.5 hours, the residual austenite in the valve spool will be transformed into martensite, and the toughness and wear resistance of the valve spool will be improved by at least 2 times.

Most manufacturers of hydraulic cartridge pressure control valves ignore this link.

AAK hydraulic cartridge pressure control valve, has unique skills to process the valve spool, you can also try a small order! AAK HYDRAULIC CARTRIDGE VALVES (463) 2023-01-06

Company Contact:

• Posted By: AAK INDUSTRY CO.,LTD.

• Phone: 86-574-83008115

• Address: Bona Building, No. 456 Taikang Middle Road, Yinzhou, Ningbo, China, NINGBO , ZHEJIANG , China

• Email:

• Website: https://www.aakindustry.com/

• Business Description: Hydraulic valve manufacturer, focused on the Development and Manufacturing of Hydraulic Cartridge Valves since 2006, in Ningbo China
  
  Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.
  
  Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.
  
  68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.
  
  Our Products:
  
  - Hydraulic Relief Valves Dust Free Packaged For Food Equipment
  
  - Hydraulic Needle Valves 450bar Over 1 Year Service Life
  
  - Hydraulic Pilot Operated Relief Valves Benchmarked With German Hawe
  
  - With Temperature And Gain From Aak Hydraulic Valves
  
  - Hydraulic Valve Blocks Free Of Oil Leakage