H L Wp G In 5v Zr 120wa Co2 Laser Power Supply - China

H/l/wp/g/in/5v zr-120wa co2 laser power supply

feature

1 - the air cooling co2 power supply has open circuit function, a good grounding in the case of protection, the 120watt co2 power supply has short-term work in the open state, so to avoid the laser tube burst due to the damage caused by air cooling co2 power supply, thereby enhancing black color power supply of life.

2 - this 120watt co2 power supply uses two taiwan cooling fans to dissipate heat for the power supply.

its heat dissipation function is better than other brands laser power supply, which can prolong the service life.

3 - the green signal block co2 power supply uses pwm or 0-5v singal for laser power control.

the h/l/p/g/in/5v interface is used for receiving control signal

4 - control is simple: the green signal block co2 power supply selects high or low level control, the use of ttl-level control makes the laser power start and stop quickly.

at the same time, the air cooling co2 power supply adds the protection switch, testing is through the external water and ventilation

5 - good compatibility:

the 120watt co2 power supply can match with most 120-130watt co2 laser tube.

also this green signal block co2 power supply has a strong adaptability and quick response on engraving and cutting.

6 - the lcd display screen is optional on the 120watt co2 power supply.

it can show this 120watt co2 power supply’s working status, output current and fault code which can help operator to remove trouble easily.

also the potentiometer of this display screen can be used to adjust output current.

application

the 120watt co2 power supply adopts high quality components and accessories for main spare parts to avoid quality problem in future and strengthen service time.

this green sginal block power supply was widely used to drive 120watt co2 laser tube, the main advantage is high frequency, fast response, small volume, small weight, easy operation, complete protecting function, very good compatibility and effectively protect laser tube and air cooling co2 power supply lifetime.

specification

input input voltage ac220v±10% (ac110v specified while order) ac frequency 47~440hz maximum input power 820w maximum input current 3.7a

output maximum output voltage 35kv maximum output current 35ma

(depending on the laser tubes of different manufacturers)

efficiency more than 90% (full load)

response speed not more than 1ms

control lnterace ttl multilevel switching control, effective level can be high and low selection (see control wining diagram)

insulation lnput-output ac 1500v 1 minutes not more than 10ma lnput-shell ac 1500v 1 minutes not more than10ma output-shell connection

open circuit protection can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)

environmental requested working temperature -10℃~50℃ storage of temperature -20℃~75℃ relative humidity maximum 85%rh (non-condensing) altitude 100, 000 feet of work

200, 000 feet of storage, dose not work

cooling methods forced air cooling (fan cooling)

dimensions (lxwxh) 335mmx205mmx100mm

Company Contact:

• Posted By: Jinan Ruby Laser Technology Co.,Ltd

• Phone: 13295411923

• Address: 8510 Room.Huiju Building.intersection of West Second Ring Road and Meili Road,Tianqiao District, Jinan , Shandong , China

• Email:

• Website: http://www.rlaserpowersupply.com

• Business Description: Jinan Ruby Laser Technology Co.,Ltd is main laser power supply manufacturer which was established at 2007 - From then on ,she has more than 17 years experience to research & develop, produce and sell ZRSUNS brand CO2 laser power supply and other laser cutting or engraving machine accessories.
  
  At present, our CO2 power supply has three series products(ZR series,BR series and DY series).
  
  ZR/BR series laser power supplies are used for ordinary CO2 laser tube and DY series CO2 power supply is specially for RECI brand CO2 laser tube.
  
  Based on client’s using feedback and’ innovation in electronic technology,the company developed LCD screen display laser power supply.
  
  Now ZRSUNS products covers 40W/50W/60W/80W/100W/150W /200W CO2 laser power supplies.
  
  Since its establishment,Jinan Ruby Laser Technology Co., Ltd attaches great importance to the quality of laser power supply to establish ZRSUNS brand’s good reputation in domestic and foreign markets In order to realize this goal, it has an experienced management team and skilled technical workers.
  
  And all accessories are purchased from United States, Japan,France, Taiwan and China’s well-known companies, some electronic components have UL,CE,CCC,TUV,SA certification.
  
  The laser power supplies are also produced accordance with the requirements of ISO9001 quality system.
  
  At present, all CO2 laser power sources have obtained CE certification, and they are used by the main laser engraving machine, laser cutting machine and laser marking machine manufacturers.
  
  Excellent quality, reasonable price and professional pre-sale and after-sales service team make ZRSUNS power supply become one of three great power supply manufacturers in China.
  
  ZRSUNS CO2 power source’s feature,specification and wiring connection method are completely same with each other, which can replace these two brands power supplies.
  
  Now Jinan Ruby Laser Technology Co., Ltd 's laser power supply have occupied about 40% of the Chinese market.
  
  Jinan Ruby Laser Technology Co., Ltd has 25 skilled technical workers, which can finish large quantity purchase orders in very short time with good quality.
  
  The company also has 4 chief engineers which make sure the company can customize the power supply on clients’ special requirement.
  
  esides standard laser power supply, ZRSUNS can also provide OEM services which can meet different clients special requirement in business.
  
  Now Jinan Ruby Laser Technology Co., Ltd hopes to establish good business relationship