Pet Preform Mould With Hot Runner - China

1 - Usually, multi-cavity preform mould does use the hot runner system

rather than cold runner system, so the design of hot runner system

plays an important role in mould quality guarantee.

Based on foreign

advanced techniques and combined with domestic clients demand, we

adopt the valve gated design, in which each cavity has its own

heating zone and temperature is measured by independent

thermocouple.

(advantages: Easily avoid some problems such as white

or draw bench on bottom).

Here, Mould is produced automatically to

reduce labor force.

Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45).

In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max.

Part and min.

Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)

2 - Our mould, designed and developed by our engineers, is of high precision and long life span without traditional problems.

In a word, Preform wall thickness is on error of 0.10mm; Weight difference is less than 0.3G; 2-5 moulds per minute; Utmost 144 cavities in one mould.

Main feature:

Cavity from 1 up to 144 -

Control system with simulating stretch testing improve rate of production.

3 - Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mould concentrically.

Specification:

2-8 cavities, 12 cavities, 16 cavities, 24 cavities, 32 cavities, 48 cavities, 56 cavities, 72 cavities, 96 cavities or as customers’ requirement.

Neck Finish:

1716, 1810, 20/24, 1881, 29/25, 26/22 and 38mm or as customers’ requirement.

Company Contact:

• Posted By: Hengxin Mould & Plastic Co.,Ltd.

• Phone: 008657684195776

• Address: :No.8 Jinniu Road ,West Industry Zone ,Huangyan, Taizhou , China

• Email:

• Website: http://www.petmould.cn

• Business Description: Hengxin Mould Introduction
  
  Zhejiang Taizhou Huangyan Hengxin Mould & Plastic Co., Ltd (HX) was established in 1992 -
  
  Hengxin occupies more than 10, 000 square meters workshop and has more than 100 employees.
  
  Hengxin is specialized in PET perform mould, cap mould, bottle blowing mould, household mould.
  
  With many years rich experience, Hengxin become one of Chinese leading and famous suppliers of PET preform mould.
  
  Especially we design and manufacture self lock PET perform mould and shut off nozzle PET perform mould by ourselves.
  
  Hengxin moulds have been well received abroad in Italy, Russia, Africa, Southeast Asia and the Middle East as well as at home.
  
  We also set up several agencies for supplying business consultation, technology support and after sale service at home and abroad.
  
  To survive by quality, to develop by creditability, to satisfy the customers are our guidelines.