High Cavitation Injection Molds - China

64 cavities mould for plastic cap(PP) High cavitation injection molds High Cavitation Molds Company HIGH CAVITATION MOLDS

Tool features:

1 - Internal thread mould/ internal unscrewing mould/ Threaded plastic injection mould.

Part function: plastic bottle caps

Part material: PP

Cavity: 64 cavities High Cavitation Injection Molding presents its own unique set of challenges within the subset of the industry.

Balance plays a huge role.

Balancing in the hot runner manifold obviously must be done upfront with mold flow analysis data.

Balancing in the hot runner tools takes a little more finesse.

Although resin plays a huge role in material flow, heater and water flow control is also a contributing factor.

Any time cavity pressure control can be used, you’re ahead of the curve.

Post gate cavity transducers can contribute to a huge cost avoidance early in the program.

Once you get into high cavitation molding, the sky is the limit.

You could be dealing with stack tools, cube molds, and so on.

Balance always plays a role no matter what, especially when it’s high volume and low margin.

Every cycle counts and machine downtime and scrap are blows to the potential revenue.

Many times it’s easy for cavities to be lost during the molding process.

This is often from gate issues, improper venting causing burns, flashing issues, etc.

Once a gate is blocked off the mold can start to become unbalanced.

The more cavities are down, the tougher it is to keep a balance on the tool.

The tooling team has to be involved once a process gets to this point.

WIT Mold is a professional mold manufacturer in China, with 10+ years rich experience in mold making, specializing in making different types of injection molds widely used in automobiles, household electrical appliances, telephone housing molds etc.

Company Contact:

• Posted By: WIT MOLD LIMITED

• Phone: 86075586225026

• Address: Room 2304, the East building of HaiAn ShiDai, ShenNan Road #12069, NanShan district, Shenzhen , Guangdong , China

• Email:

• Website: https://witmold.com

• Business Description: WIT MOLD is a very professional mould design and mould maker located South of China, certified ISO2009: 2015 international quality standard.
  
  We started to build the complete molds since 2011, specializing in manufacturing different types of injection moulds for exporting worldwide mainly North America and Europe，including:
  
  Conv entional custom plastic molds
  
  Precision injection moulds
  
  Insert molding tools
  
  High cavitation injection molds
  
  Mold making for large components
  
  Two Shot molds / 2K molds/ Bi-injection moulds
  
  Unscrewing molds
  
  Gas assist moulds
  
  Injection structural foam molds
  
  Special structural moulds
  
  Thermoset molds
  
  Die casting tools