Vegetable Oil Refinery Machine Plant - China

Introduction

At present, sunflower oil production process have two kind of processing method: pressing and leaching(extraction).

Pressing method is by physical pressure and get oil directly from the oil seeds.

The whole process does not involve any chemical additives, to ensure product safety, health, pollution-free.

The expeller method is divided into cold pressing and hot pressing.

The difference of cold pressing and hot pressing is whether use high-temperature process or not.

Hot pressing using a high temperature, can improve the oil yield, but destroy nutrients; cold-pressed not to use high temperature, the oil is low, but the complete nutritional ingredients.

1.1 Here have some example of hot pressing and cold pressing method.

1.1.1 Process and methods of soybean seeds pressing.

There are two ways of pressing of soybean: cold press and hot press.

Soybean cold press process: Soybean-Filtering-Press(s uitable moisture)

Hot press process: Soybean-Cleaning-Prepress ing-Crude soybean oil-Filter-Twice pressing-Crude soybean oil after twice pressing-Filter

Introduction of process: Will screen soybean and cleaning soybean first, then crushing soybean and add 7-8% of water to soften the seeds, send soybean to cooker, steam until about 115℃, then will press seeds.

1.1.2 Process and method of rapeseed press:

The rapeseed have two ways of pressing, cold press and hot press.

To improve the oil yield and oil quality, generally the hot press is used.

Cold press: Rapeseed/vegetable seeds-Screening-Squeezing -Steaming-Pressing, First, Screening the rapeseed and check the moisture content of rapeseed, if the rapeseed too dry, we need to add 2.5-3% water, later put the seeds into the expeller.

Hot press: Rapeseed/vegetable seeds-Screening-Squeezing -Steaming-Pressing, Filter the rapeseed and remove the residue, and then enter the flaking machine for seeds flaking.

After flaking, will go into the cooker for steaming and roasting, during steaming add 2-3% water, will start milling after the seeds become brown and the temperature is 110-120℃.

1.1.3 The process and method of peanut kernel pressing.

Hot press and cold press is suitable for peanut kernel, generally we use hot press.

Hot pressing, the first crushing or flaking the peanut kernel, then placed in the steamer for 1.5-2 hours.

When the cake’s temperature arrives 120℃ and water content is 3%, will start normal squeezing.

Peanut-Cleaning-First milling-filter-Press two times-Crude oil-Refinery-Press third times-Crude oil after pressing-Filter-Cake after pressing.

1.1.4 Character of some press machine

ZY-24 style 202-3style 200A-3style

Output capacity (t/d) 50-55(seed) 45-50 9-12

Residual oil % 11-13(cakes) 11-13 6-7

Motor(kw) 30, 7.5, 22 30 18.5

Weight (kg) 7500 6500 5000

Dimension(mm) 3060*1970*4500 2950*1950*3270 2850*1850*3270

1.2 The leaching(extraction) method is to use solvent naphtha (6#) after fully immerse oil meal raw material to high temperature (260 degrees) and extract the oil from seeds meal, after a 'technology of six” (degreasing, degumming, dewatering, decoloring, deodorization, deacidification).

The biggest characteristic is high oil yield and low production cost, the price is lower than squeezing method.

The extraction(LEACHING) method is widespread used in the market.

Because of high oil yield and low production cost, the extraction(leaching) machine is hot sale in the worldwide.

The difference of pressing and extraction(leaching):

Squeezing method due to the yield is low, so the raw material for squeezing must be seeds of high oil content, and itself is probably oil crops; Due only to squeeze at the same time, the residual oil in the cake is high, so the modern enterprise in order to save resources, the pursuit of efficiency of cases will be to squeeze the oil cake with leaching rule of oil again

The extraction method applies to vast oil seeds.

Especially those high nutritional value but low oil yield seeds.

Due to the advantage of leaching, this method is widely used in the cooking oil industrial.

Approximately 90% of the oil in the world is using extraction method.

3 - Raw material

Almost all of the grain seeds can be pressed to make sunflower oil, like corn, soybean, peanut, sunflower, flaxseed, coconut, palm, rice brain, cottonseed, sesame, castor seed and so on.

Raw material Oil content

Camellia 58-60%

Peanut 44-55%

Castor seed 50-70%

Soybean 18-21%

Cottonseed 33-40%

Rapeseed 33-40%

Sesame 45-50%

Sunflower 45%

Safflower 29-45%

Rice bran 18-20%

Corn embryo 30-40%

Walnut 40-65%

Flaxseed/linseed 29-44%

Palm 50-55%

Coconut 35-45%

4 - Professional suggestion

Kindly please inform us your required daily capacity, quantity, raw material, covering space and related data，so that we can provide you professional equipment information and design proper oil production line for you.

we will suggest economical and reasonable production line for you.

Welcome to contact us and get more information.

Company Contact:

• Posted By: Jiaozuo Yongle Oil Machinery Co., Ltd

• Phone: 008618603739448

• Address: Yingxie Road, Zhengzhou city, Henan, China, Zhengzhou , China

• Email:

• Business Description: Jiaozuo Yongle Oil Machinery Co., Ltd., located in Henan Province, is a main producer of oil equipment in our country and a unit exempt from quality examination.
  
  Our company has a research institution which develops new products with our experiment basis and an integrative joint stock production company of oil and electromechanical engineering, production and installation.
  
  We continue to introduce foreign talents, renew products and take the leading position in this field.