Marine Exhaust Boiler - China

This series boiler is used for producing steam and hot

water by absorbing the exhaust gas heat from diesel engine,

as to improve the efficiency of diesel engine.

So boiler’s

operator should attach importance to the exhaust gas

boiler’s management and also should familiar with the

boiler’s structure and relevant system, should do the daily

maintenance, and make the boiler’s yield benefit.

Brief

instruction to boiler’s structure

The boiler is a natural circulation vertical exhaust gas

boiler with smoke tube.

It consists of boiler body, upper &

lower smoke chamber; exhaust gas bypass equipment and so on.

The boiler body is formed the drum by shell, plain end

and lower tube plate.

Upper tube plate is inside the drum,

the upper tube plate is welded with lower tube plate by

steel tube, the upper tube plate is connected with plain end

by smoke chamber plate.

It is the circular steam space

outside of the smoke chamber, the flue is in the above of

upper tube plate, all smoke tubes are covered by boiler

water, smoke box is in the under of lower tube plate, and

the smoke box is connected with the exhaust gas bypass

equipment.

There are many hand-holes under the shell.

In

view of the convenience for checking & repairing boiler,

manhole will be installed on the boiler.

The steam inside the boiler can be transferred to

outside by main steam valve that is on boiler’s plain end.

To insure boiler’s safety, one or two-safety valve which

can discharge total steam produced by the boiler is

installed on the plain end.

Once boiler is running in the

abnormal condition and result in super-high pressure, steam

can be discharged from safety valve.

There are water level gauges on the above or under of

steam-water dividing surface of the upper of drum, and water

level gauge can indicate the water level all the time, it’s

very helpful for boiler’s operator to do supervision.

In

additional, at the same height limit, there is one water

level controller used for the transmission of water level,

and also can send all kinds of electric sign to boiler’s

controlling system according to the different water level.

According to these different electric sign, controlling

system can control the running of water pump, and send alarm

sign.

The upper smoke box lies in the top of boiler.

Exhaust

gas from boiler body discharge to chimney pass by upper

smoke box.

The lower part is the inlet smoke box for exhaust gas.

The

exhaust gas inlet nozzle will be connected with the main

diesel engine on the lower smoke box.

On the smoke box,

there is an inspection door for overhauling.

The thermometer and barometer that lies on the upper &

lower smoke box separately can indicate the temperature and

resistance force of exhaust gas as to supervise the

boiler’s running status.

In order to reduce the heat loss and insure the safety

of boiler’s running, the outer surface of boiler body and

upper & lower smoke box are covered with thick 60mm

insulation.

Company Contact:

• Posted By: Shazhou Marine Boiler Co.,Ltd

• Phone: 0512

• Address: No 1 west renmin road, Suzhou , China

• Email:

• Website: http://www.szspare.com

• Business Description: Shazhou Marine Boiler Co., Ltd has built an enviable reputation as
  
  one of the nation s leading specialists in produce of marine
  
  boiler, pressure vessel and industrial boiler, which is
  
  headquartered in the State Level Hygiene City Zhangjiagang, Jiangsu
  
  Economical Development Area.
  
  The company is adjacent to
  
  Zhangjiagang Free Trade Zone with its convenient traffic to the
  
  surrounding cities, such as Suzhou, Wuxi, Nantong, Shanghai, Nanjing
  
  etc.
  
  From its origins as Shazhou Marine Boiler Factory, it has
  
  grown to get along with business with more than one hundred
  
  countries all over the world.
  
  Shazhou traces its history as a boiler engineering and manufacturing company back to 1956 - We also have experiences in cooperating with Aalborg Industries from 1989~2001, supplied over 300 marine boilers.
  
  In 2003 we developed and produced 35t/h oil fired boiler for large vessel with Mitsubishi.
  
  In the end of 1999 our company reconstructed and became limited liability company.
  
  The company covers an area of 150 000 square meters with the aggregate asset of RMB150 000 000, fixed assets RMB70 000 000 - Our team of highly qualified and experienced personnel includes 50 technological staff, 15 quality controllers for measurement, 10 non destructive inspectors and 150 workforces with welding certificates.
  
  Our company has produced more than 11000 utility marine boilers and pressure vessels with over 10 types and 100 specifications for ships.
  
  With higher quality, the products are delivered to over sea s market: such as Singapore, Japan, Italy, Romania, Iran, Norway, Germany, Spain, Denmark, etc.
  
  The company has been approved by all class societies of BV, CCS, DNV, GL, KR, LR, NK; has the product inspection certificates issued by societies of ABS and RINA.
  
  In 1997, we are awarded ISO9001 quality system certificate which was upgraded to ISO9001, 2000 version in 2004 -
  
  Shazhou Marine Boiler Co., Ltd will keep on introducingadvanced technology and equipment, inviting highly motivated professionals, developing courage, innovation and new products which meet the demand of market.
  
  We look forward to the opportunity to serve you and cooperate with you in the future.