Gnlw Series Decanting Centrifuge - China

LW series is a normal decanting centrifuge mode of our

company, they are ideal choices for separating particles in

drilling mud.

Decanting Centrifuge separate the suspending

fluids using the principle of centrifugal action, the

suspending fluids is pushed into the rotor drum through the

inlet pipe and the fluid hole of the spiral feeder.

Under

the influence of centrifugal force, solid phase particles

are pushed to the internal wall of the drum, then to the nud

export of the small end of the drum and excreted.

But the

fluids is excreted from the overflow hole of the large end.

Such cycle is in order to achieve the purpose of continuous

separation.

High speed decanting centrifuge are effective for

separation

Features of GN Decanter Centrifuge

Southwest Petroleum University Technology Support

High Speed up to 3200RPM & Variable Speed by frequency

converter

The main body of the decanter centrifuge made from stainless

stee: SS304/SS316/Titan ium Alloy

The screw propeller and solids discharge made from stainless

steel Stainless Steel protected by tungsten carbide alloy.

German FAG/SKF Brand Bearings

Screw propeller & Solids Discharge Stainless Steel protected

by tungsten carbide alloy.

Solids Liquid separation system package available

Eletrical Components: SIEMENS/Schneider/ CHINT

Oilfield Decanter Centrifuge For drilling fluids

Decanter centrifuge are used to process unweighted and

weighted, water-based and oil-based drilling fluids (muds).

Mechanical energy is utilized to increase the gravitational

force exerted on solids that are present in the mud

system.

oilfield Decanting Centrifuge are able to apply over

3, 000 G-forces on the liquid/solids mixture, which separates

the heavier solids from the lighter solids.

Additionally,

high G-forces separate fine solids from liquid.

Mechanical separation of solids from the mud system through

the use of a decanter centrifuge is a highly-effective means

of maintaining proper mud weight and viscosity.

When used in

conjunction with other Solids control equipment, decanting

centrifuge enable users to maintain the mud properties

within the prescribed range as per the drilling program.

Typically, oilfield decanting centrifuge is the final

processing units in the arrangement of solids control

equipment.

Decanting centrifuge preceded by gas busters,

gumbo removal equipment (if utilized), shale shakers, mud

Cleaners (if utilized), Vacuum degassers and hyrdocyclones.

GN Solids Control based in China manufacture and supply

complete line of high-speed, variable-speed and fully

variable-speed decanting centrifuge for handling drilling

fluids.

Our factory and company are Quality Management

System ISO 9001-2000 certified.

GN Solids Control operate

international oil gas drilling mud separation system。

Ruggedly built for oilfield and industrial Solids control

service, decanting centrifuge is especially effective in

meeting fluid-on-cuttings discharge requirements in

environmentally sensitive areas.

decanting centrifuge also

deliver high fluid recovery rates and efficient solids

control to significantly reduce the operator’s total mud

cost and limit waste disposal volumes.

GN-China leading

decanting centrifuge manufacturer.

Company Contact:

• Posted By: GN Shaker Screen Co Ltd

• Phone: 008618603252681

• Address: No.3 Industry Road,Dachang Chaobai River Developme, Langfang , China

• Email:

• Website: http://www.gnshakerscreen.com/

• Business Description: GN shaker screen designs and manufactures a full inventory of shale
  
  shaker screens, supply replacement screens for all shale shakers in
  
  drilling activities; keep update to the latest screening technology to
  
  improve the solids control efficiency.