Double Inlet Sandblast Venturi Nozzle - China

Divided Venturi nozzle structure contraction section, straight sections

and diffusion segment of three parts, aerodynamic performance is

superior to straight bore nozzle, vortex phenomenon is significantly

improved or ceased to exist, the pressure loss is greatly reduced, at

the same pressure conditions, increase exports to more than double the

speed of the abrasive, work efficiency increased by 15% - 40% compared

to straight bore nozzle, abrasive consumption reduced by 20% .

Single inlet nozzle is a time into the wind.

Double inlet is the second into the wind, before and after the two nozzles, there is space betwe+R[ 3] Cen the two, at around eight holes at intervals, in such a large and one small, the nozzle arrangement in a previous post, As the role of the high- speed air stream to produce a sufficiently large negative pressure, RC air is drawn into the nozzle, the discharged air is greater than the compressed air into the nozzle outlet velocity abrasive increased again.

In addition, double inlet jet produced sand lance end diameter larger than a single into a number of wind divergence surface abrasive stream into 30% larger than a single wind, higher cleaning efficiency.

Company Contact:

• Posted By: Mudanjiang tip top

• Phone: 8613684539099

• Address: Changan Street, Mudanjiang , China

• Email:

• Website: http://www.vulcanized.org

• Business Description: Our company engaged in metal processing and insulation material more than 10 years, we has a very rich experience in this area.
  
  Our company from casting, lathing, milling, hobbing, line cutting, heat treatment, to plating.
  
  we form a complete manufacturing system, can help you solve any Machining problem.
  
  Our company can produce according to your samples or drawings.
  
  Welcome to consult and negotiate.
  
  vulcanized fiber sheet tubes rod,
  
  Filament Wound Tubing,
  
  Melamine fiberglass Laminates Tubes, Epoxy Fibreglass Pultrusion Rod, Fuse Cutout brass Components, B4C boron carbide nozzle