Zxl Self Priming Pump Close Coupled - China

ZXL directly-coupled self-priming pump is developed based on the ZX flexible shaft coupling self-priming pump.

It has a horizontal structure, and the pump and motor are coaxially connected.

Advantages

1 - Compact structure.

It has a beautiful appearance, and occupies less space.

If an IP55 outdoor motor is used, there is no need for a pump room and it can be placed outdoors for use.

2 - Smooth operation, low noise, and high concentricity of components.

The motor and pump are directly connected, simplifying the intermediate structure and increasing the smoothness of operation.

The impeller has dynamic and static balance, no vibration during operation, low noise, extending the service life of bearings, and improving the operating environment.

3 - The shaft seal adopts high-quality mechanical seals, and the dynamic and static rings are made of hard alloy, which is wear-resistant, leak free, and has a long service life.

4 - Adopting advanced hydraulic models, it has the characteristics of high efficiency and good performance.

5 - Easy to install, use, and maintain.

The discharge pipeline does not require a check valve, and the suction pipeline does not require a bottom valve, thus simplifying the pipeline system and improving working conditions.

6 - Unique structure and good self-priming performance, only a certain amount of liquid needs to be stored in the pump body before operation.

Usage conditions:

1 - The ambient temperature is ≤ 40 ℃, the altitude is ≤ 1000m, the relative humidity is ≤ 95%, the medium temperature is ≤ 80 ℃, and it is required to reach 200 ℃.

2 - The self-priming height should not exceed the specified value of 5-6.5 meters, and the length of the suction pipe should be ≤ 10 meters

Application

1 - ZXL self-priming pump is suitable for industrial and urban water supply and drainage, environmental protection, construction, fire protection, chemical, pharmaceutical, dyeing, printing and dyeing, brewing, electricity, electroplating, papermaking, industrial and mining flushing, equipment cooling, etc.

The temperature of the medium used should not exceed 80 ℃, the viscosity should be ≤ 100 cP, and the solid content should be below 30%.

2 - Using bronze impellers and explosion-proof motors, it is suitable for oil depots, gas stations, oil tankers, oil tankers, docks, oil trucks, airports, and transporting gasoline, kerosene, diesel, aviation kerosene, etc.

separately.

If corrosion-resistant mechanical seals and stainless steel materials are used instead, they can also be applied to chemical, pharmaceutical, brewing, electroplating, printing, papermaking, power mining, etc.

The conveying medium temperature is -20 ℃ -80 ℃, the viscosity is ≤ 100%, and the solid content can reach below 30%.

The ZXL series direct coupled self-priming pump is particularly suitable for oil tankers or water transport ships, and can also be used as a sweeping pump with good sweeping effect.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.