Zxl Horizontal Self Priming Pump - China

ZXL horizontal self-priming pump adopts the pump body structure of axial liquid return.

The pump body consists of suction chamber, liquid storage chamber, vortex chamber, liquid return hole, gas-liquid separation chamber and so on.

When the pump and motor is driven directly, attention should be paid to the coaxiality of the pump shaft and motor shaft.

The pump coupling must be well fixed with screws and locked with nuts.

In order to let the pump body maintain a certain amount of storage fluid, in order to achieve better self-priming and prevent dry friction of mechanical seal, it must make the pump inlet higher than the center line of the pump shaft.

Suction inlet installation height should not exceed 5 meters.

The valves and flanges in the suction pipeline should be strictly prevented from leaking air or liquid.

A filter should be set up on the suction line to prevent the suction of solids and other sundries in the pump body.

The discharge line does not require a check valve, and the suction line does not require a bottom valve, thus simplifying the piping system.

Suction height: 4 to 5meters.

ZXL horizontal self-priming pump is suitable for industrial and urban water supply and drainage, environmental protection, construction, fire protection, chemical, pharmaceutical, dye, printing and dyeing, brewing, electric power, electroplating, paper making, industrial and mining washing, equipment cooling, etc.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.