Zje Slurry Feeding Pump For Press Filter - China

ZJE-II Horizontal Slurry feeding Pump for press filter ZJE-II slurry feeding pump is a kind of special impurity pump.

Slurry is sucked from the back side of the pump.

The pump is equipped with pack gland seal (no leakage) and flow and head etc performance are special for some special conditions.

ZJE-II slurry feeding pump features: 1 - Advanced Hydraulic structure design, high efficiency, corrosion resistance, stable and reliable operation; 2 - High flow rate and low pressure; 3 - Low flow rate and high pressure discharge; 4 - Simple shaft seal is reliable, no water, no mechanical seal, no leakage; 5 - Pump does not need frequency conversion adjusting speed motor.

The pump is with low speed motor and suitable for conveying high concentration slurry.

ZJE-II slurry feeding pump is driven by low speed motor( 1480rpm).

If low pressure is need, the impeller can be trimmed or the rotary speed of pump can be reduced.

We can also use ZJ slurry pump with mechanical seal same as ZJE-II pump.

ZJE-II slurry feeding pump requires feeding level higher than the center height of the pump.

The pump inlet pipe should not be too long.

Feeding pump meaning: Name: ZJE-II Series slurry feeding pump for press filter Pump Type: Horizontal centrifugal slurry pump Driver Type: DC (direct coupling) Power: Motor Discharge Size: 50mm-125mm Capacity: 30m3/h-305m3/h Head: 43m-91.8m

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.