Zgd Self Priming Screw Pump - China

ZGD Screw self priming pump is the self priming screw pump with high lift and small flow.

The pump is driven by 220V, single phase motor and can be used as the household pump.

ZGD screw self priming pump is used to pump the normal water without solid grains.

ZGD Screw self priming pump has the features such as reasonable structure, small volume, light weight, low energy consumption, high efficiency, high water pressure and convenient operation etc.

ZGD Screw self priming pump is widely used for domestic water collection, underground water collection, tap water pressurized field irrigation, farmland drainage and irrigation, vegetable greenhouses water supply, construction and industrial drainage and other places.

ZGD Screw self priming pump can also be sued for high pressure irrigation, mobile sprinkler irrigation, pipe pressurization, high rise water supply etc.

Water tank for ZGD Screw self priming should be filled with water before starting the pump.

Air in water tank can be drained after the pump starts for 1.5 minutes.

The pump can not have dry work without water.

Operation conditions: Liquid temperature is not higher than 40 DegC.

Liquid PH: 6 to 8 The volume ratio of solid impurities in liquid is not more than 1 percent and particle size is not greater than 0.2mm.

Power supply : 50HZ, 220V, Single phase motor

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.