Zb Strong Self Priming Pump With Vacuum Suction Device - China

ZB self priming centrifugal pump is with vacuum suction device and sution height is up 9meters.

The pump can be equipped with automatical control cabinet for automatic operation.

ZF Strong Self priming Centrifugal pump with vacuum suction device can be driven by motor and control panel to have fully automatic operation.

The enhanced self priming performance is up 9meters.

1 - When the pump starts, watering, vacuum pump and bottom valve are not needed.

The pump can exhaust gases and prime water by itself and the self-priming altitude is high; 2 - The self-priming time is short with the flow ranging from 6.3 to 1500m3/h and the self-priming time ranging from 6 to 90 seconds.

3 - The unique vacuum suction device makes the space between the liquid level and the impeller at a vacuum state, thereby reducing the cavitation damage to the impeller and effectively improving the pump operation efficiency and priming altitude;

4 - Manual or automatic separation and reunion of the vacuum suction device is achieved through clutch mechanism so that the service life is prolonged and energy savings effect is increased.

5 - With simple installation characteristics, the pump is mounted on the ground and can be used when the suction line is inserted into the water.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.