Ycb External Gear Oil Pump - China

YCB external meshing circular arc gear oil pump

YCB gear oil pump is a new type of external meshing circular arc gear pump.

The gear in the circular arc gear oil pump adopts the tooth profile compounded by advanced circular arc and other curves, so the pump has excellent working characteristics.

The pump is compared with the traditional Involute gear oil pump; It is a new series of energy-saving pumps with the advantages of small pressure fluctuations, low noise, high efficiency, and long service life.

YCB gear oil pump gear adopts double circular arc Sine wave tooth profile.

Compared with Involute gear, its most outstanding advantage is that there is no relative sliding of the tooth profile during gear meshing, so the tooth surface is free of wear, running balance, no trapping, low noise, long life and high efficiency.

This pump breaks free from the constraints of traditional design, allowing gear pumps to enter a new field in design, production, and use.

The pump shaft end seal is designed in two forms: mechanical seal and packing seal.

Users can choose according to their requirements

Equipped with a differential pressure safety valve as overload protection, the total return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump.

It can also be adjusted separately within the allowable discharge pressure range according to actual needs.

However, this safety valve cannot be used as a pressure reducing valve for long-term operation, and can be installed separately on the pipeline if necessary.

YCB gear oil pump application:

It can be used as transmission and Booster pump in oil transmission system.

It can be used as a fuel pump for transportation, pressurization, and injection in the oil transportation system.

It can be used as a lubricating oil pump in all industrial fields.

Application scope of YCB gear oil pump:

YCB gear oil pump is suitable for conveying lubricating oil without solid particles and fibers, corrosiveness, temperature not higher than 80 ℃, viscosity of 5-1500cst or other liquids similar to lubricating oil.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.