Water Liquid Ring Vacuum Pump - China

Water ring vacuum pump /liquid ring vacuum pump

2BE1 Series vacuum pump is for single stage single action structure form and it has the advantages of simple structure, convenient maintenance, reliable operation, high efficiency and energy saving.

Compared with SK/2SK/SZ water ring vacuum pump widely used in China, it has significant advantages such as high vacuum degree, low power consumption and reliable operation.

It is an ideal substitute for SK, 2SK and SZ water ring vacuum pump.

2BE1 series water ring vacuum pump has the main features as follows: 1, bearings are all imported original bearings to ensure the high stability of 2BE1 vacuum pump impeller in the process of accurate positioning.

2 - The impeller is made of ductile cast iron or welded steel plate, which fully ensures the stability of 2BE1 vacuum pump impeller under various bad working conditions and greatly improves the service life of 2BE1 vacuum pump.

3 - The pump body is made of steel plate, which improves the service life of 2BE vacuum pump.

4, 2BE1 vacuum pump sleeve as the most easily damaged parts uses high chromium stainless steel material, than ordinary material life increased 5 times.

5, belt pulley (belt drive) adopts standard high precision cone pulley, reliable operation, convenient disassembly, long belt service life.

6, coupling (direct transmission) adopts standard high strength elastic coupling, elastic element is made of polyurethane material, stable and reliable operation, long service life.

7 - Unique upper air water separator saves space and effectively reduces noise.

8, all castings are casted with resin sand, with good surface quality.

The casting surface does not need to be greased, so that 2BE1 vacuum pump heat dissipation effect is better.

9, mechanical seal (optional parts) all imported parts, fully ensure that 2BE1 series vacuum pump in the long run without leakage.

10 - The contour line of the pump body wall is approximately elliptical to ensure the best pumping effect.

It is usually used to pump non-solid particles, insoluble in water, and non-corrosive gases in order to form a vacuum and pressure in a closed container.

Through changing the flow material, it can also be used to suck corrosive gas or corrosive liquid as working fluid.

The pump is Widely used in papermaking, chemical, petrochemical, light industry, pharmaceutical, food, metallurgy, building materials, stone tools, coal washing, mineral processing, fertilizer and other industries.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.