Thermal Oil Centrifugal Pump Up 350 Degree Celsius - China

Thermal oil pump RY waterless cooled hot oil pump has been widely used in the system of carrier heating and different industrial fields such as petroleum, rubber, resin, textile, dyeing and printing, construction, road building, machinery shipping, and so on.

RY thermal oil centrifugal pump is suitable to transport high temperature liquids without solid particles and other weak corrosive liquids.

The liquid temperature is less than 350 degree Celsius.

Structure:

RY hot oil pump is for the structure of single stage single suction cantilever foot support.

Axial suction port and vertical upward discharge port.

The pump is mounted on the base plate together with the motor.

The support of RY hot oil pump adopts ball bearings at both ends with the front end lubricated by lubricating oil and the rear end lubricated by grease.

There is an oil pipe between them, which is used to observe sealing condition at any time and retrieve heat conducting oil.

RY hot oil pump adopts natural heat dissipation to change the traditional device of water cooling.

It has simple structure, small volume, low cost, reliable performance.

Seal type:

Combination of packing seal and mechanical seal.

Packing seal has high temperature resisting for high temperature liquids.

Mechanical seal has high mechanical strength and good wear resistance (hard alloy material)

PTFE lip-type seal has the strongest corrosion resistance.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.