Sz Series Fiberglass Plastic Self Priming Centrifugal Chemical Pump - China

SZ type fiberglass reinforced plastics corrosion resistant self-priming pump.

The flow components for SZ fiberglass self priming pump are made of the modified phenolic fiberglass reinforced plastic material by high temperature molding.

The pump has the advantages such as light weight, high strength, no deformation, high temperature resistance, corrosion resistance and easy maintenance etc.

Mechanical seal for the pump is WB2 fitted outside type F4 corrugated mechanical seal which is reliable and has a long service life.

SZ type fiberglass self priming pump has good self priming performance.

The pump body is equipped with a liquid suction chamber, liquid storage chamber, liquid back check valve and reflux hole.

Before the pump works, keep a quantitative liquid in the pump body and exhaust the air in the pipe and then the pump can transfer the liquids.

The pump works without foot valve and simplified the pipeline.

SZ type fiberglass self priming pump is widely used to transfer various non-oxidizing acids(Hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid, phosphoric acid)etc corrosive liquids which is not easy to crystallize and temperature is no higher than 100 degree Celsius)in petrochemical, smelting, dyes, printing and dyeing, pesticides, rare earth, fertilizer and other industries

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.