Self Priming Gas Liquid Vortex Pump - China

Self-priming gas-liquid mixing pump

The suction inlet of the gas-liquid mixture pump can use the negative pressure action to inhale the gas, without the use of air compressor and atmospheric ejector.

The high speed rotating impeller of the pump mixes the liquid and the gas, without stirrer and mixer.

Due to the pressurized mixing in the pump, the gas and liquid are fully dissolved, and the dissolution efficiency can reach 80-100%.

Highly soluble solutions can be produced without large pressurized dissolved gas tanks or expensive reaction towers.

The gas-liquid ratio is about 1: 9 (inspiratory capacity is 8-10%), and the inspiratory capacity can be increased by using in series

A gas-liquid mixing pump can inhale, mix, dissolve and directly deliver the highly dissolved liquid to the point of use.

The use of gas-liquid mixing pump can improve the efficiency of dissolved gas-liquid production, simplify the production device, save the site, save the operation cost and maintenance cost

Application

The pump is mainly used for gas-liquid mixing and stirring, liquid transport, circulation and pressurization, ozone water preparation, oxygen-rich water preparation, as well as water, pure water, food spray treatment.

Thin, clean, low viscosity or liquid containing fine impurities Liquid temperature: -15 to 120 degree Celsius

gas-liquid ratio is about 1: 9 (inspiratory capacity is 8-10%)

Self-priming height is about 9m (NPSH)

The suction inlet is horizontal and the exhaust outlet is vertical

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.