S Sh Single Stage Double Suction Centrifugal Water Pump - China

Single stage horizontal split case double suction centrifugal pump is made of cast iron and driven motor.

The pump is used to transfer the water or other similar liquid no higher than 80 degree celsius.

S, SH split case double suction centrifugal pump vertical or horizontal structure.

The suction inlet and discharge outlet of the S split case double suction pump are both below the axis line of the pump and in horizontal direction to the shaft.

Easy maintenance, no need to disassemble inlet and outlet pipelines and motors, high efficiency and energy saving, wide application range.

S single-stage double-suction horizontal split case centrifugal pump is a new type of energy-saving horizontal centrifugal pump.

The pump is mainly composed of the pump body, pump cover, shaft, impeller, seal ring, shaft sleeve, bearing parts, etc.

Its suction inlet and outlet are below the axis line of the water pump.

During maintenance, as long as the pump cover is lifted, all parts can be removed for maintenance.

S Single stage double suction centrifugal pump is used to convey clean water or other liquids with similar physical and chemical properties to water.

According to user requirements, the pump can be also used for conveying sediment water or various corrosive liquids by changing the pump structure and material.

Its performance conforms to JB/1050-93 single suction double suction clean water centrifugal pump type and basic parameters standard.

Range of application Applicable to factories, mines, urban water supply, power stations, tap water, farmland irrigation and various water conservancy projects.

Model meaning: 300 S 90 A 300 -- suction diameter (mm) S - single stage double suction centrifugal pump 90 -- design head (m) A -- the impeller is cut for the first time Technical parameters Flow rate: 80 to 15000 m3 / h Head: 19 to 100m Speed: 1450 to 2900 r/min Inlet and outlet diameter: 10 to 500mm Temperature range: not more than 80 degree Celsius Working pressure: ≤ 1.6mpa

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.