Qxn Submersible Centrifugal Water Pump - China

QXN built - in series engineering submersible pump Our company has a strong technical development capacity and experience in the submersible pumps .

QXN Submersible pump is designed and produced with a novel suction and drainage structure.

The pump is composed of dry vertical motor and pump coaxial direct connection and adopt a number of modern advanced technology.

This electric pump is compared with other electric pumps and has self-cooling mode.

When the electric pump is pumping, the motor can run continuously for a long time.

It can discharge the shallow water well on the surface of mining, ship, warehouse construction site and other places.

Break through the other pump motor can not run out of the water.

Thus increased the service life of the electric pump.

Motor can work when the motor is higher than liquid level.

Main USES: This series of electric pumps can be widely used in many fields due to its superior and unique operational performance.

Drainage places for water conservancy projects, underground projects, mines, drainage, water tower refrigerator water supply and drainage, underground water lifting, infrastructure projects and other operations surface shallow water drainage.

Conditions of use: The electric pump should work continuously under the following operating conditions.

1 - The working medium shall be clean water without corrosion, and the volume ratio of sand content in the medium shall not exceed 0.10 percent.

The volume ratio of sand content in the medium shall not exceed 0.10 percent and the particle size shall not exceed 0.20mm.

2 - The temperature of the medium shall not exceed 40 degrees Celsius, and the ph value of the medium is between 6.5 and 8.5 - 3 - The electric pump should be used in the range near the rated head.

4 - The electric pump should be completely immersed in water for use, diving depth should not exceed 3m, the deepest is not more than 5m, the electric pump from the bottom of 0.5m above, but not into the mud.

5 - Power supply frequency is 50Hz, voltage single-phase 220V, three-phase 380V, voltage fluctuation range is 0.9-1.1 times of the rating

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.