Qszqsh Submersible Axial Mixed Flow Pump - China

QSZ submersible axial-flow pump, QSH type submersible mixed flow pump are the new pumps improved by our company.

The motor driving the pump is dry completely enclosed submersible three-phase asynchronous motor.

the pump and motor are connected by the shaft as the whole one.

The pump can be underwater to work long term.

As the pump and motor are integrated and submerged into the water at the same time, there is no need to consume labor in the installation site.

Time-consuming assembly process of machine and pump axis alignment makes on-site installation convenient and fast.

Because the electric pump runs underwater, it can greatly simplify the civil structure of the pump station and reduce the installation area and save 30% to 40% of the total cost of the civil engineering of the pump station.

The electric pump submerges into the water and runs to have low noise, good motor cooling conditions, no high temperature in the pump station, no noise interference and improve the pump station working environment.

At the same time, the whole underground pumping station can be built according to the requirements to maintain the environment style of the ground.

Easy to operate, flexible, can open and close the unit at any time, no need to lubricate the rubber bearing of water pump before starting up, easy to realize remote control and automatic control.

Unit assembly and disassembly is convenient and easy to maintain.

This unit is adopted to try to solve the flood control problem of the station along the river and in the lake area where the water level rises and falls greatly and completely which eliminates the long shaft between the pump and the motor and improves the operation safety and reliability.

The pump and motor is connected into one whole.

At the same the pump works underwater long term and can have remote control.

No need to build pump station.

The pump is especially suitable fore emergency drought relief and flood drainage.

Operation conditions: 1 - Power supply, 50Hz voltage 380V three-phase ac power supply 2 - Water temperature shall not be higher than 40℃ 3 - The PH value of water should be within the range of 5.5-8.5 4, the electric pump must be completely submerged in the water, submerged depth shall not be less than 0.8 meters

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.