Qsp Submersible Fountain Pump - China

QSP fountain submersible pump is special fountain pump, the pump motor is made of high quality material DR470 cold-rolled steel, evening to increase the number of turns of windings and diving line of wire, cable in three phase four wire type JHS fountain, special cables, impeller increases the loose prevention device, motor chamber adopts imported antirust paint, through the above structure improvements make submersible pump to have Small moment of inertia and thus to have the quick response speed, bearing with high performance special shaft, improve insulation level, so as to meet the needs of the special music fountain, frequent starting.

QSP fountain submersible pump -- application scope: QSP small fountain submersible pump is mainly used for fountain water supply, aquaculture and other places.

It is widely used in low-lift urban, farmland irrigation and irrigation, sprinkling irrigation, industrial and civil supply and drainage system, water diversion in hilly and mountainous areas, and drainage in low-lying areas.

QSPF stainless steel fountain pump can be used in various waterscape projects, chemical enterprises, salt farms, seawater discharge and special mine environment.

QSP fountain submersible pump -- description of operating conditions: The electric pump should be completely submerged in water, the diving depth is not less than 0.5 meters, not more than 5 meters.

Ambient water temperature should not be higher than 40℃.

The working medium is non-corrosive water with a sand content of less than 0.1% and a PH value of 6.5~8.5 - The power supply shall be three-phase 50 hz, rated at 380 volts, and the supply voltage shall be within the range of 342~420 volts.

The electric pump shall be used in the applicable range near the rated head.

Electric pump should be equipped with the corresponding start protector, reliable grounding.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.