Qjb Submersible Mixer Pump For Wastewater Treatment - China

QJB Series Submersible Mixer can be divided into two types : mixing and Agitating series, low-speed flow Propeller series.

Mixing and Agitating series Submersible Mixer Suits for stirring liquids containing suspended solids in sewage treatment plants and industrial processes;

Low-speed flow Propeller series Suits for aeration tanks in industrial and urban sewage treatment plants, which generate strong water flow with low tangential flow, which can be used for circulation and nitrification, denitrification and create water flow for phosphorus removal, etc.

FQJB Series Floating Submersible Mixer Restructured on the basis of QJB series submersible mixer, adding a stainless-steel buoy, the specific selection is implemented in accordance with the QJB series submersible mixer.

Conditions Of Application

In order to ensure the normal operation of the submersible mixer, please make correct selection of the operating environment .

1、The highest temperature of the medium shall not exceed 40℃

2、The scope of pH value of the medium: 5~9;

3、medium density of not more than 1150 kg/m³

4、diving depth in general not more than 20 m when at the long-term diving operation.

Key matters need attention:

The submersible mixer must completely submerse in the water and cannot operate in the inflammable, explosive, highly corrosive and high-temperature environment

The steel expansion bolts must be fixed as required, and the cables must be tightened and fixed after installation.

All use polyurethane impeller, helical gearbox reducer.

Characteristics

1、Compact structure, simple operation and maintenance, convenient installation and maintenance, and long service life

2、The impeller has a reasonable hydraulic design structure, high working efficiency, and the swept-back blade has a self-cleaning function, which can prevent debris from being entangled and blocked;

3、Mixed use with aeration system can greatly reduce energy consumption, significantly increase oxygenation, and effectively prevent precipitation;

4、The motor winding insulation grade is F, the protection grade is IP68, and NSK/SKF bearings are used.

The motor can be equipped with an anti-condensation device.

The motor uses an over-temperature protection device to make the motor work more reliably;

5、Two mechanical seals; the mechanical seal is sealed with tungsten carbide material, and the rubber material is fluorine rubber

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.