Pneumatic Piston Slurry Barrel Pump - China

FY series pneumatic slurry pump is suitable for conveying chemical slurry with high viscosity (VIS) ≤ 120, 000 CPS/25℃, with explosion-proof, anti-corrosion, anti-precipitation, low noise, energy saving and other functions.

It is the ideal mobile conveying equipment.

It is applied to artificial leather, film shifting leather, rolling leather, color coating board, printing and dyeing, medicine, coating, chemical industry, textile, painting, spraying, film aluminum plating, color steel tile and other industries.

Structure and Principle:

The product adopts the effect of pressure difference to make the piston run up and down and drive the guide piston to open and close further to play the role of lifting.

Adjust the flow and pressure of working gas to control and adjust the feed flow of pneumatic slurry pump.

Combined with pneumatic hydraulic control system can make it work automatically.

Usage:

1 - Put the guide tube into the barrel to be delivered correctly.

2 - Connect the corrosion resistant hose to the outlet and connect it to the feeding point.

3, the air inlet valve is closed, and then connect the air source pipe to the air inlet valve joint, according to the required slurry flow to open the air inlet valve to adjust the operating frequency of pneumatic slurry pump, you can work.

Maintenance:

1 - FY series pneumatic barrel pump can avoid hitting the cylinder block to avoid deformation, causing the death of life plug, resulting in scrap

2 - After the piston has been operated for more than one million times, the cylinder block should be clear and filled with # 30 lubricating oil according to the accumulation of water in the air compressor's air supply process.

3, if not used for a long time, should be in the solvent working cleaning, to prevent pulp freezing, block the guide pipe.

Attention:

1 - Add 30# lubricating oil immediately in case of heating of the cylinder block (subject to hot hand feeling) during work.

2 - If the adjusting nut becomes loose during use and leakage occurs, adjust the nut in time.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.