Lgp Side Channel Multistage Centrifugal Pump - China

LPGP-65 LPG multistage pump is a centrifugal side channel pump with a horizontal structure, a total of 6 stages, the shaft is mechanically sealed, no cooling.

LPGP-65 multistage pump is used to transfer LPG, especially for liquids with high pressure difference, low cavitation NPSH and gas content up to 50 percent, such as LPG pumped from underground tanks.

The pump USES a pre-compressed turbine at the suction end, which makes it suitable for use in the case of low cavitation NPSH allowance.

positive suction heads is lower than 0.5 m.

Therefore, the pump can be used in bad air suction conditions.

Application: 1 - Bottling 2 - Pump liquefied gas from underground tanks; 3 - Load and unload large quantities of gas-filled tanker cars, tanker cars; 4 - Liquefied gas pump gas recovery Technical Parameter: Max.

Capacity: 42 m3/h Max.

Discharge.

Pressure: 40 bar Max.

Viscosity: 100 cSt Temperature Range: -40 to 220 degree celsius Model LPGP-65 LPGP-150

Medium LPG Working temperature -32 to 60 degree celsius

Inlet/outlet diameter DN65/DN40 DN40/DN25

Motor 380V, 50HZ/4KW/1450RPM 380V, 50HZ, 5.5kw/1450rpm

Number of stages 6 6

Connecting flanges DIN 2501 PN40 DIN 2501 PN40

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.