Isr Horizontal Hot Water Circulation Pump - China

ISR hot water circulation pump Performance range:

Pump speed can be divided into two kinds: 2900rpm and 1450rpm

Structure: Horizontal

Maximum flow : 240m3 /h, 400m3 /h

Maximum lift: 125 m, 55 m

Maximum operating temperature: ≤120° C

The maximum operating pressure of the pump is 1.6mpa

Pump description:

ISR type pump is a horizontal single stage hot water circulating pump is for suction and delivery of clean water and similar liquid of physical and chemical properties similar to water without solid particles.

It is suitable for heating and boiler hot water circulation.

This pump has simple structure, reliable performance, small volume, light weight, good cavitation resistance, low power consumption, easy to use and maintain.

ISR type pump is universal with the whole series of 140 specifications and only four shafts.

The shaft, bearing, shaft seal and impeller fastener of the same specification can be interchanged.

There are only four kinds of suspension frame for the whole series of pumps.

This pump is rear open, disconnecting the pump cover and impeller does not require removal of suction and discharge pipeline.

Two ball bearings are mounted in the suspension frame and lubricated with machine oil or grease.

The pump is driven directly by an electric motor through an elastic coupling.

The vortex chamber, foot, inlet flange and outlet flange are casted as a whole.

Shaft seals are mechanically sealed with high temperature resistant double end faces

Conveyed medium:

Diluted, clean, non-corrosive, non-explosive clean water and liquids with physicochemical properties similar to water and containing no solid particles or fibers.

It is suitable for heating and boiler hot water circulation

Application:

1 - Hot water supply and suction, high temperature liquid pumping

2 - Boiler hot water circulation

3 - Pressurized hot water supply in the bath center

4 - Solar water heaters and hot water supply

5 - Hot water pumping in the hotel hot water circulation system

Model significance:

ISR65-50-160

ISR: hot water circulating pump

65: pump inlet diameter of 65mm

50: diameter of the pump discharge 50M

160: impeller diameter of 160mm

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.