Ir Corrosion Resistant Thermal Insulation Pump - China

IR corrosion resistant thermal insulation pump

IR corrosion resistant thermal insulation pump is a single stage single suction cantilever centrifugal pump.

It is the derivative of IH chemical centrifugal pump and mainly used in chemical, chemical fiber, petroleum, food, pharmaceutical and other industries to transport solution medium with high freezing point (or high crystallization point temperature) and corrosive high temperature liquids.

Technical parameters

The design pressure of the pump at room temperature is 1.6mpa

Flow Q=3.4 ~ 460m3/h

Pumped medium temperature is not higher than 250℃ head H=3.6 ~ 132m

Note: Our factory can also produce thermal insulation pumps of other materials according to the needs of customers.

structure

IR thermal insulation pump is horizontal radial part rear door structure(do not remove the pipeline during maintenance).

Body is axial suction, radial discharge intermediate support.

The bearing is lubricated with thin oil and the bearing stand is fitted with an oil level gauge and a water-cooling device.

The insulated steam line of the pump is connected with the external insulated steam system through flange or screw mouth.

The pump and motor are connected with an extended detachable coupling Model description:

For example: IR50-32-200 (A)

IR- Corrosion resistant thermal insulation pump

50- Suction diameter (50mm)

32- Discharge outlet diameter (32mm)

Nominal diameter of impeller (200mm)

A- The outside diameter of the impeller is cut for the first time

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.