Horizontal Vortex Shell Mixed Flow Water Pump - China

Horizontal single stage single suction vortex shell mixed flow pump

Vortex shell type mixed-flow pump is suitable for conveying water or other liquids with physical, chemical properties similar to water.

The temperature of the liquid should not be higher than 80℃.

Mixed flow pump is Widely used in farmland irrigation and drainage, industrial and urban water supply and drainage and other occasions.

Horizontal vortex shell mixed flow pump is a kind of pump commonly used in irrigation and drainage in farmland.

Depending on the installation and use conditions, such as installation position, pipeline length and so on, there are different outlet directions, the head is more than 3 to 8 meters.

General small and medium-sized vortex shell mixed-flow pump are for closed impeller.

Agricultural pumps are often sealed with lead asbestos powder or oil-impregnation flax soft packing.

The diameter below 300 mm is mostly vertical outlet, while the diameter above 300 mm is mostly horizontal outlet.

In order to reduce the length of the pipeline and the number of bends, inclined outlet is often used.

The vortex shell mixed-flow pump has the advantages of simple structure, reliability and easy maintenance.

The performance of the pump is good, the efficiency and power curve is flat, the range of use is wide, the power of the closing point is small, the cavitation performance is good, the use of the head is 3 to 15 meters.

Vortex shell type mixed flow pump has generally the larger shell/casing with larger area, but the height is generally lower.

Vortex shell type mixed flow pump has two kinds of horizontal and vertical.

Horizontal pump according to the direction of water outlet is divided into horizontal, vertical and inclined etc.

three types.

Model significance: 300HW-8A Diameter of pump inlet and outlet (mm)

HW -- Horizontal vortex shell mixed flow pump

8 -- Design head (m)

A -- cutting the outer diameter of the impeller or changing the impeller with different performance.

Flow rate: 140 to 9000m3/h, head: 3.7 to 20m.

Driver: Electric motor or diesel engine.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.