Horizontal External Bearing Twin Screw Pump - China

Horizontal External Bearing Twin Screw Pumps

Advantages：

1 - Conveying liquid is stable, no pulsation, no stirring, small vibration, low noise.

2, double screw pump has a strong self-priming performance, multi-phase mixed transport, gas rate is not higher than 80%, sand content is not higher than 500g/m3.

3, external bearing structure, using independent lubrication, can transport a variety of non-lubricating medium

4, the use of synchronous gear drive, two rotors do not contact, even if a short time idling is no harm.

5, pump body with heating sleeve, can transport a variety of clean or contain solid small particles of low viscosity or high viscosity medium (general particle diameter less than 0.12-0.2mm)

6, the correct selection of materials, and even can transport a lot of corrosive media.

7, double suction structure, no axial force on the rotor.

8 twin screw pump are the use of shaft end mechanical seal or bellows mechanical seal, with long life, less leakage, wide range of application characteristics.

Performance:

1, high working pressure 4.0mpa

2, flow range 1 ~ 1000m3/h

3, the temperature range of -20 ~ 120℃

4, medium viscosity 1 ~ 3000mm2/s, reduce the speed can reach 106mm2/s

Double screw pump medium viscosity has a greater impact on the performance of the double screw pump, the nominal displacement of the pump refers to the displacement under specific viscosity conditions, in order to ensure that the pump can work in high efficiency, in the test is not sufficient, it is recommended to choose the speed according to the following viscosity conditions: medium viscosity cSt < 400 speed R /min 1500; Medium viscosity cSt 400 ~ 1200 speed r/min 1000; Medium viscosity cSt 1200 ~ 3600 speed R /min 750 twin screw pump, Application

1, oil field: used as oil, gas, water, micro fine solid particles and other multi-phase mixed transport pump and crude oil transport pump.

2, shipbuilding industry: used for Marine loading pump, ship bottom sweep tank and sewage treatment, host lubrication pump, fuel pump.

3, petrochemical industry: used as a variety of resins, pigments, paraffin wax, paint, ink, latex, all kinds of oil, crude oil, heavy oil and other loading and transportation pump.

4, thermal power plant: used as heavy oil, crude oil transport pump, host lubricating oil pump.

5, food industry: used as alcohol, honey, syrup, juice, animal and vegetable oil, milk, soy sauce transport pump.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.