Horizonal Multistage Boiler Feed Water Pump - China

Horizontal multistage boiler feed pump

Is Suitable to convey water with temperature below 105 degree Celsius and other similar fluids.

DG horizontal multistage pump is a segmented single-suction multistage centrifugal pump.

High efficiency, wide range of performance, safe and stable operation, low noise, long life, easy installation and maintenance, etc.

For the conveyance of fresh water or other liquids similar in physical and chemical properties to water.

It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump's flow components, sealing form and adding a cooling system.

Pump meets with JB/T1051-93 Multistage clean water centrifugal pump Type basic Parameters and standard.

Pumped medium

It can be used for conveying clean water without solid particles (abrasive matter), without suspended matter or other liquids with physical and chemical properties similar to clean water.

shaft seal

The shaft seal adopts soft packing seal with cooling water, or mechanical seal according to user's requirement.

bearing balance

The rotor of DG medium pressure pump is supported by the rolling bearings at both ends of the pump shaft.

The rotor is lubricated with thin oil and cooled with circulating water, and the axial thrust of the rotor is automatically balanced by a balancing plate.

Isostatic backwater is returned to the pump suction section through isostatic backwater pipe.

The rotor of distributed type multistage boiler feed pump is supported by sliding bearings at both ends of pump shaft.

The rotor is lubricated with thin oil and cooled with circulating water, and the axial thrust of the rotor is balanced with a balance plate.

A return pipe is arranged between the balance chamber and the front section.

DG type multistage boiler feed pump rotor is supported by sliding bearings at both ends of the pump.

The bearing is compulsively lubricated, the pump itself is equipped with an oil system, and the axial thrust of the rotor is balanced by a balancing plate.

And with thrust bearing, used to withstand the residual axial force caused by the change of working conditions, between the balance chamber and the suction pipe is equipped with return pipe.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.