Filter Press Feeding Pump - China

Filter press feeding pump

No leakage filter press feeding pump (side suction type with negative pressure device)

The rated performance point and size of filter press feeding pump meet with ISO2858-1975 (e) international standard.

It can be used to replace the enamel pump, ceramic pump, rubber liner pump, fluorine alloy pump, F-type corrosion resistant pump, IH chemical centrifugal pump etc.

Pumps.

Filter press feed pump is used to convey corrosive liquids or slurry with particles in the filter press process.

The liquid temperature range: -10℃ to 110℃.

The pumps are widely used in chemical, petroleum, starch, pharmaceutical, dye, paint, smelting, papermaking, electroplating, electric power, food and other industries.

Mechanical seal adopts negative pressure device.

Under the condition of increasing pressure and decreasing flow rate, the liquid is transported for a long time.

The mechanical seal shall not bear the working pressure to ensure that the mechanical seal will never leak.

Side suction type and open impeller

YLB type low speed filter press feed pump is for transporting slurry containing larger granularity or have been designed for sand pulp.

The low speed large flow pump is with axial inlet and radial exports to ensure that the larger sand particles enter the pump cavity through open impeller and are discharged out immediately.

The open impeller has wear-resisting and is not clogged.

Different pumps materials

According to the pumped medium, the pump can be made of different materials such as 304, 304L, 316L, duplex stainless steel, F46, fluoroplastic alloy, UHMWPE and other materials with different mechanical seals for the acid and alkali solvent transport.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.