End Suctin Centrifugal Water Pump - China

IS horizontal single stage single suction clean water centrifugal pump is used for industry, agriculture and urban, drainage, fire water supply, etc.

IS end suction pump is for suction and delivery of clean water and other similar liquid of physical and chemical properties.

The liquid is without solid particles.

So, it is widely used in industry, agriculture, urban drainage, fire water supply and so on.

IS centrifugal pump is designed according to the performance and dimensions specified in the international standard IS02858, and its technical standards are close to the international standard, reaching the international advanced level.

It is one of the energy-saving pump products popularized in China.

This pump has simple structure, reliable performance, small volume, light weight, good cavitation resistance, low power consumption, easy to use and maintain.

IS horizontal centrifugal pumps have wide versatility.

The whole series has 140 specifications, but only four shafts.

The bearing, shaft seal is the same for the same specification shaft.

There are only four kinds of suspension frame for the whole series of pumps.

IS type clean water centrifugal pump is rear open type.

It is not necessary to remove the suction and discharge pipelines when the pump cover and impeller are disassembled.

Two ball bearings are mounted in the suspension frame and lubricated with machine oil or grease.

The pump is driven directly by an electric motor through an elastic coupling.

The vortex chamber, foot, inlet flange and outlet flange are casted as a whole.

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.